[Mon Jun  4 04:45:18 2012] Detection parameters:
  Position = (296.9, 274.0) = 5 59 47.47 -50 26 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45567.3 +/- 255.3
  Background counts = 9.9
  Rate = 4 +/- 0.02

[Mon Jun  4 04:45:18 2012] Off-axis axis estimate = 1.78'
[Mon Jun  4 04:58:26 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 04:58:26 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Mon Jun  4 04:58:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Mon Jun  4 04:58:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Mon Jun  4 05:27:58 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun  4 05:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 05:27:58 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun  4 05:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 05:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 05:27:58 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun  4 05:27:58 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun  4 05:27:58 2012] Fit fullrun_mos1_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun  4 05:46:40 2012] Spatial fit model total counts = 42625.300000, observed total counts = 42616.000000
[Mon Jun  4 05:46:40 2012] Offset between fit and detection position for source 1 = 0.028534 pixels
[Mon Jun  4 05:46:40 2012] 42585.240000 total counts/ 8457.740000 bgd. counts: snr = 371.088341
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028534 pixels
  Position = (296.9, 274.0) = 5 59 47.48 -50 26 51.1
  Extent = 7.0 (6.9-7.1)", rotation angle = 0
  Source counts = 34127.5 +/- 206.4
  Background counts = 8457.7
  Rate = 3 +/- 0.02
[Mon Jun  4 05:46:40 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 05:46:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 05:46:40 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 05:46:40 2012] Source does appear to be extended
[Mon Jun  4 05:46:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 06:02:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 06:02:54 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Jun  4 06:02:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Mon Jun  4 06:02:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.01"
[Mon Jun  4 06:18:15 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun  4 06:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 06:18:15 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun  4 06:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 06:18:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 06:18:15 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun  4 06:18:15 2012] fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun  4 06:18:15 2012] Fit fullrun_mos1_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun  4 06:19:33 2012] Spatial fit model total counts = 42616.100000, observed total counts = 42616.000000
[Mon Jun  4 06:19:33 2012] Offset between fit and detection position for source 1 = 0.000022 pixels
[Mon Jun  4 06:19:33 2012] 42576.070000 total counts/ 8448.970000 bgd. counts: snr = 371.276534
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000022 pixels
  Position = (296.9, 274.0) = 5 59 47.48 -50 26 51.1
  Extent = 7.0 (6.9-7.1)", rotation angle = 0
  Source counts = 34127.1 +/- 206.3
  Background counts = 8449.0
  Rate = 3 +/- 0.02
[Mon Jun  4 06:19:33 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 06:19:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 06:19:33 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 06:19:33 2012] Source does appear to be extended
[Mon Jun  4 06:19:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 07:04:10 2012] Counts = 34127.100000, rescaling region sizes by 3.000000
[Mon Jun  4 07:04:10 2012] XMMSAS src. selection expression = ellipse(25779.547500, 23786.675400, 1261.535436, 1261.535436, 0.000000, X, Y)
[Mon Jun  4 07:04:10 2012] Writing source region out to fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun  4 07:04:10 2012] Extracting stamp from image fullrun_mos1_xmm0129360201_pi300-10000_cl_sm2.00.img.gz, (224, 201) - (369, 346)
[Mon Jun  4 07:04:10 2012] XMMSAS bgd. selection expression = annulus(25779.547500, 23786.675400, 6307.677182, 12615.354363, X, Y) && !ellipse(30766.338196, 21978.107590, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  4 07:04:10 2012] Writing fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1.gif
[Mon Jun  4 07:04:14 2012] Mean detx,y = (624.16, -709.96) 
[Mon Jun  4 07:04:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 07:09:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 07:09:55 2012] Setting source spectrum file to fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 07:09:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  4 07:30:00 2012] Updating aperture counts using extracted products
[Mon Jun  4 07:30:00 2012] Error reading totcts from fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 07:30:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 07:30:00 2012] Using photon index=1.80, rate=2.67, arf fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1.arf
[Mon Jun  4 07:30:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 07:30:00 2012] Updating source flux to 2.3e-11
[Mon Jun  4 07:30:13 2012] Reading fit data from xmm0129360201/analysis//spectral/fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun  4 07:30:13 2012] Spectral fit parameter nH value = 4.50243e+19
[Mon Jun  4 07:30:13 2012] Spectral fit parameter PhoIndex value = 2.33805
[Mon Jun  4 07:30:13 2012] Failed to get F(0.3-8.0) from xmm0129360201/analysis//spectral/fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun  4 07:30:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 07:30:13 2012] Using Nh = 4.5e+19, photon index=2.34, rate=2.67, arf fullrun_mos1_xmm0129360201_pi300-10000_pass1_cl_src1.arf
[Mon Jun  4 07:30:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 07:30:13 2012] Updating source flux to 1.9e-11