[Wed Jun 19 16:48:28 2013] Detection parameters:
  Position = (296.2, 230.3) = 5 25 17.14 -69 43 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 13.1
  Background counts = 32.6
  Rate = 0.003 +/- 0.0006

[Wed Jun 19 16:48:28 2013] Off-axis axis estimate = 4.94'
[Sat Jun 22 14:13:48 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 14:13:48 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Sat Jun 22 14:13:48 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Sat Jun 22 14:13:48 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.90"
[Sun Jun 23 01:43:47 2013] fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 23 01:43:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 01:43:47 2013] fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 23 01:43:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 01:43:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:43:48 2013] fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 23 01:43:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 23 01:43:48 2013] fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 23 01:43:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 23 01:43:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129342001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:44:04 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.126329 pixels away
[Sun Jun 23 01:44:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 01:44:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 01:44:04 2013] Assessing source extent using major
[Sun Jun 23 01:44:04 2013] Source does appear to be extended
[Sun Jun 23 01:44:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 01:44:04 2013] Deleting source due to low Poisson probability 0.8