[Sun Sep  2 15:32:51 2012] Detection parameters:
  Position = (459.4, 197.4) = 5 23 0.29 -69 45 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.9 +/- 11.0
  Background counts = 19.8
  Rate = 0.002 +/- 0.0004

[Sun Sep  2 15:32:51 2012] Off-axis axis estimate = 13.78'
[Mon Sep  3 21:51:01 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 21:51:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 21:51:01 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Mon Sep  3 21:51:01 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.966
[Mon Sep  3 21:51:01 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.32"
[Tue Sep  4 00:31:35 2012] fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19.ximg exists
[Tue Sep  4 00:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19.csv
[Tue Sep  4 00:31:35 2012] fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Sep  4 00:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19.csv
[Tue Sep  4 00:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:31:36 2012] fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Sep  4 00:31:36 2012] fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Sep  4 00:31:36 2012] Fit fullrun_mos2_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Sep  4 00:31:46 2012] Spatial fit model total counts = 292.000000, observed total counts = 292.000000
[Tue Sep  4 00:31:46 2012] Offset between fit and detection position for source 16 = 0.170081 pixels
[Tue Sep  4 00:31:46 2012] 289.584600 total counts/ 261.855000 bgd. counts: snr = 1.713615
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.170081 pixels
  Position = (459.3, 197.4) = 5 23 0.43 -69 45 28.8
  Extent = 4.2 (3.3-6.0)", rotation angle = 0
  Source counts = 27.7 +/- 17.0
  Background counts = 261.9
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability