[Sun Sep  2 15:32:28 2012] Detection parameters:
  Position = (322.0, 290.9) = 5 24 55.58 -69 38 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62580.1 +/- 298.6
  Background counts = 70.2
  Rate = 2 +/- 0.01

[Sun Sep  2 15:32:29 2012] Off-axis axis estimate = 1.80'
[Mon Sep  3 13:37:07 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 13:37:07 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Sep  3 13:37:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Mon Sep  3 13:37:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.33"
[Mon Sep  3 21:51:00 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2.ximg exists
[Mon Sep  3 21:51:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 21:51:00 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Sep  3 21:51:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 21:51:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 21:51:01 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep  3 21:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep  3 21:51:01 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep  3 21:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep  3 21:51:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341801_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:31:43 2012] Spatial fit model total counts = 217977.000000, observed total counts = 251356.000000
[Tue Sep  4 00:31:43 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 00:31:43 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 00:31:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 00:31:43 2012] Assessing source extent using major
[Tue Sep  4 00:31:43 2012] Source does appear to be extended
[Tue Sep  4 00:31:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 00:31:43 2012] Source is confused with source 1
[Tue Sep  4 07:45:56 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 07:45:56 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Sep  4 07:45:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Tue Sep  4 07:45:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.33"
[Tue Sep  4 12:30:50 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_src2.ximg exists
[Tue Sep  4 12:30:50 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Sep  4 12:30:50 2012] Fit fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Sep  4 12:30:50 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep  4 12:30:50 2012] fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep  4 12:30:50 2012] Fit fullrun_mos1_xmm0129341801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep  4 17:28:36 2012] Spatial fit model total counts = 254194.000000, observed total counts = 251356.000000
[Tue Sep  4 17:28:36 2012] Offset between fit and detection position for source 2 = 3.319083 pixels
[Tue Sep  4 17:28:36 2012] 88132.200000 total counts/ 25600.000000 bgd. counts: snr = 390.826250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.319083 pixels
  Position = (322.3, 294.2) = 5 24 55.37 -69 38 31.0
  Extent = 14.7 (14.6-29.3)" x 7.0 (6.9-7.1)", rotation angle = 80 (80-81) degrees
  Source counts = 62532.2 +/- 296.9
  Background counts = 25600.0
  Rate = 2 +/- 0.01
[Tue Sep  4 17:28:36 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 17:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 17:28:36 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 17:28:36 2012] Source does appear to be extended
[Tue Sep  4 17:28:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.06
[Tue Sep  4 17:28:36 2012] Source is asymmetric
[Tue Sep  4 17:52:33 2012] Counts = 62532.200000, rescaling region sizes by 3.000000
[Tue Sep  4 17:52:33 2012] XMMSAS src. selection expression = ellipse(27990.391800, 25543.600000, 2637.612076, 1265.477436, 80.475490, X, Y)
[Tue Sep  4 17:52:33 2012] Writing source region out to fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2_src.reg
[Tue Sep  4 17:52:33 2012] Extracting stamp from image fullrun_mos1_xmm0129341801_pi300-10000_cl_sm2.00.img.gz, (171, 143) - (474, 446)
[Tue Sep  4 17:52:33 2012] XMMSAS bgd. selection expression = annulus(27990.391800, 25543.600000, 13188.060379, 26376.120759, X, Y) && !ellipse(27229.172000, 25071.384000, 6921.024199, 6921.024199, 0.000000, X, Y) && !ellipse(27668.949800, 25650.270000, 6023.664173, 6023.664173, 0.000000, X, Y) && !ellipse(27551.776000, 26174.328000, 3438.840099, 2584.824074, 62.290400, X, Y) && !ellipse(28207.142181, 26519.371918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26157.594971, 26958.245605, 1740.000000, 1740.000000, 0.000000, X, Y)
[Tue Sep  4 17:52:33 2012] Writing fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2.gif
[Tue Sep  4 17:54:37 2012] Mean detx,y = (-1407.64, 286.13) 
[Tue Sep  4 17:54:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 18:01:20 2012] grppha failed
[Tue Sep  4 18:01:20 2012] Setting source spectrum file to fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Sep  4 18:01:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Sep  4 18:41:48 2012] Updating aperture counts using extracted products
[Tue Sep  4 18:41:48 2012] Error reading totcts from fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Sep  4 18:41:48 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 18:41:49 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Tue Sep  4 18:41:49 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Sep  4 18:41:49 2012] Source 2 has no response, skipping
[Tue Sep  4 18:41:50 2012] xmm0129341801/analysis//spectral/fullrun_mos1_xmm0129341801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete