[Fri May 17 07:15:50 2013] Detection parameters: Position = (289.0, 287.0) = 5 25 11.78 -69 38 14.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 35272.0 +/- 227.3 Background counts = 51.3 Rate = 1 +/- 0.01 [Fri May 17 07:15:50 2013] Off-axis axis estimate = 1.08' [Sat May 18 01:48:43 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting [Sat May 18 01:48:43 2013] Initial guess for spatial extent in simple fitting = 6.97" [Sat May 18 01:48:43 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906 [Sat May 18 01:48:43 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 6.97" [Sat May 18 03:41:50 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5.ximg exists [Sat May 18 03:41:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5.csv [Sat May 18 03:41:50 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5_1.ximg exists [Sat May 18 03:41:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5.csv [Sat May 18 03:41:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 18 03:41:51 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sat May 18 03:41:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5.csv [Sat May 18 03:41:51 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sat May 18 03:41:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5.csv [Sat May 18 03:41:51 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 18 03:42:06 2013] Spatial fit model total counts = 78214.100000, observed total counts = 93351.000000 [Sat May 18 03:42:06 2013] Poor agreement between spatial fit and data for source 7 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 18 03:42:06 2013] Vigneting correction estimate = 1.000000 [Sat May 18 03:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 18 03:42:06 2013] Assessing source extent using major [Sat May 18 03:42:06 2013] Source does appear to be extended [Sat May 18 03:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:46:38 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:46:38 2013] Initial guess for spatial extent in simple fitting = 6.97" [Sun May 19 20:46:38 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906 [Sun May 19 20:46:38 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 6.97" [Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src5.ximg exists [Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src5_1.ximg exists [Mon May 20 07:28:16 2013] Fit fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src5 appears to have run properly [Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Mon May 20 07:28:16 2013] Fit fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Mon May 20 07:28:28 2013] Spatial fit model total counts = 85564.400000, observed total counts = 93351.000000 [Mon May 20 07:28:28 2013] Offset between fit and detection position for source 7 = 3.395270 pixels [Mon May 20 07:28:28 2013] 76446.400000 total counts/ 25281.900000 bgd. counts: snr = 321.783581 Spatial fit parameters: Offset between fit and detection position for source 7 = 3.395270 pixels Position = (292.1, 285.7) = 5 25 9.15 -69 38 20.9 Extent = 13.9 (13.9-27.9)", rotation angle = 0 Source counts = 51164.5 +/- 276.5 Background counts = 25281.9 Rate = 2 +/- 0.01 [Mon May 20 07:28:28 2013] Vigneting correction estimate = 1.000000 [Mon May 20 07:28:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 20 07:28:28 2013] Assessing source extent using major axis lower bound [Mon May 20 07:28:28 2013] Source does appear to be extended [Mon May 20 07:28:28 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 20 07:28:28 2013] Source is confused with source 3 [Mon May 20 20:06:07 2013] Counts = 51164.500000, rescaling region sizes by 3.000000 [Mon May 20 20:06:07 2013] XMMSAS src. selection expression = ellipse(25367.648000, 24810.588200, 2508.066072, 2508.066072, 0.000000, X, Y) [Mon May 20 20:06:07 2013] Writing source region out to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_src.reg [Mon May 20 20:06:07 2013] Extracting stamp from image fullrun_mos2_xmm0129341701_pi300-10000_cl_sm2.00.img.gz, (148, 142) - (436, 430) [Mon May 20 20:06:07 2013] XMMSAS bgd. selection expression = annulus(25367.648000, 24810.588200, 12540.330361, 25080.660722, X, Y) && !ellipse(25956.388885, 23763.257690, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26399.579651, 23780.279083, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26048.813110, 24834.325714, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26662.868286, 24911.066681, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(12062.591370, 23339.589355, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 20 20:06:07 2013] Writing fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7.gif [Mon May 20 20:45:19 2013] Mean detx,y = (-291.17, -1693.81) [Mon May 20 20:45:22 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 20 20:55:02 2013] Binned source spectrum to 10 counts/bin [Mon May 20 20:55:02 2013] Setting source spectrum file to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Mon May 20 20:55:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_bgd.pi.gz [Tue May 21 01:43:38 2013] Updating aperture counts using extracted products [Tue May 21 01:43:38 2013] Total counts from fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 482637.00 [Tue May 21 01:43:38 2013] Total counts from fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_bgd.pi.gz = 23713.00 [Tue May 21 01:43:38 2013] Got source and background scale factors 14001690.000000, 372874806.000000 [Tue May 21 01:43:38 2013] User source parameters: Position = (292.1, 285.7) = 5 25 9.15 -69 38 20.9 Extent = 13.9 (13.9-27.9)", rotation angle = 0 Source aperture counts = 481746.6 +/- 695.7 Background aperture counts = 890.4 Rate = 2e+01 +/- 0.03 [Tue May 21 01:43:39 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 21 01:43:39 2013] Using photon index=1.80, rate=2.07, arf fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7.arf [Tue May 21 01:43:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 21 01:43:39 2013] Updating source flux to 2.1e-11 [Tue May 21 01:43:53 2013] Flag p found in src. 7 procflags, skipping spectral fitting [Tue May 21 01:43:53 2013] Flag c found in src. 7 procflags, skipping spectral fitting [Tue May 21 01:43:56 2013] xmm0129341701/analysis//spectral/fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete