[Fri May 17 07:15:49 2013] Detection parameters:
  Position = (304.0, 273.9) = 5 24 59.26 -69 39 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54419.2 +/- 303.0
  Background counts = 61.8
  Rate = 2 +/- 0.01

[Fri May 17 07:15:50 2013] Off-axis axis estimate = 1.82'
[Sat May 18 01:48:43 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:48:43 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sat May 18 01:48:43 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sat May 18 01:48:43 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.34"
[Sat May 18 03:41:50 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 18 03:41:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2.csv
[Sat May 18 03:41:50 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 18 03:41:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2.csv
[Sat May 18 03:41:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 03:41:51 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 18 03:41:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 18 03:41:51 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 18 03:41:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 18 03:41:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 03:42:06 2013] Spatial fit model total counts = 211573.000000, observed total counts = 181138.000000
[Sat May 18 03:42:06 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 03:42:06 2013] Vigneting correction estimate = 1.000000
[Sat May 18 03:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 03:42:06 2013] Assessing source extent using major
[Sat May 18 03:42:06 2013] Source does appear to be extended
[Sat May 18 03:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 03:42:06 2013] Source is confused with source 1
[Sun May 19 20:46:38 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:46:38 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sun May 19 20:46:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sun May 19 20:46:38 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.34"
[Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 20 07:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2.csv
[Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 20 07:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2.csv
[Mon May 20 07:28:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 20 07:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 07:28:16 2013] fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 20 07:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 07:28:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 07:28:28 2013] Spatial fit model total counts = 204276.000000, observed total counts = 181138.000000
[Mon May 20 07:28:28 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 07:28:28 2013] Vigneting correction estimate = 1.000000
[Mon May 20 07:28:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 07:28:28 2013] Assessing source extent using major
[Mon May 20 07:28:28 2013] Source does appear to be extended
[Mon May 20 07:28:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:06:07 2013] Counts = 54419.203125, rescaling region sizes by 3.000000
[Mon May 20 20:06:07 2013] XMMSAS src. selection expression = ellipse(26399.579651, 23780.279083, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon May 20 20:06:07 2013] Writing source region out to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_src.reg
[Mon May 20 20:06:07 2013] Extracting stamp from image fullrun_mos2_xmm0129341701_pi300-10000_cl_sm2.00.img.gz, (192, 161) - (417, 386)
[Mon May 20 20:06:07 2013] XMMSAS bgd. selection expression = annulus(26399.579651, 23780.279083, 9787.500000, 19575.000000, X, Y) && !ellipse(25956.388885, 23763.257690, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26048.813110, 24834.325714, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26662.868286, 24911.066681, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25367.648000, 24810.588200, 3344.088096, 3344.088096, 0.000000, X, Y) && !ellipse(12062.591370, 23339.589355, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 20:06:07 2013] Writing fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2.gif
[Mon May 20 20:16:54 2013] Mean detx,y = (-373.63, -1658.01) 
[Mon May 20 20:16:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 20:25:34 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 20:25:35 2013] Setting source spectrum file to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 20 20:25:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 20 23:46:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 23:46:53 2013] rmf not generated due to insufficient counts
[Tue May 21 01:43:37 2013] Updating aperture counts using extracted products
[Tue May 21 01:43:37 2013] Total counts from fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 462595.00
[Tue May 21 01:43:37 2013] Total counts from fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 38037.00
[Tue May 21 01:43:37 2013] Got source and background scale factors 11200750.000000, 561582713.000000
[Tue May 21 01:43:37 2013] User source parameters:
  Position = (304.0, 273.9) = 5 24 59.26 -69 39 11.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 461836.4 +/- 681.1
  Background aperture counts = 758.6
  Rate = 2e+01 +/- 0.03

[Tue May 21 01:43:37 2013] Updating counts from extracted products
[Tue May 21 01:43:37 2013] Set source signif. to 461836.35/27.54 = 16767.50
[Tue May 21 01:43:39 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 01:43:39 2013] Using photon index=1.80, rate=18.7, arf fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2.arf
[Tue May 21 01:43:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 01:43:39 2013] Updating source flux to 1.9e-10
[Tue May 21 01:43:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 01:43:56 2013] xmm0129341701/analysis//spectral/fullrun_mos2_xmm0129341701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete