[Fri May 17 07:15:18 2013] Detection parameters:
  Position = (240.6, 194.0) = 5 25 52.32 -69 44 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.8 +/- 13.9
  Background counts = 17.9
  Rate = 0.008 +/- 0.001

[Fri May 17 07:15:18 2013] Off-axis axis estimate = 8.66'
[Fri May 17 21:12:33 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Fri May 17 21:12:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 21:12:33 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Fri May 17 21:12:33 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.018
[Fri May 17 21:12:33 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.76"
[Sat May 18 01:48:42 2013] fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8.ximg exists
[Sat May 18 01:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8.csv
[Sat May 18 01:48:42 2013] fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat May 18 01:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8.csv
[Sat May 18 01:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 01:48:43 2013] fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat May 18 01:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat May 18 01:48:43 2013] fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat May 18 01:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat May 18 01:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341701_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 03:42:01 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.020516 pixels away
[Sat May 18 03:42:01 2013] Vigneting correction estimate = 1.000000
[Sat May 18 03:42:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 03:42:01 2013] Assessing source extent using major
[Sat May 18 03:42:01 2013] Source does appear to be extended
[Sat May 18 03:42:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 03:42:01 2013] Deleting source due to low Poisson probability 0.9