[Fri May 18 11:49:14 2012] Detection parameters:
  Position = (234.5, 467.1) = 5 25 50.80 -69 27 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 11.7
  Background counts = 24.1
  Rate = 0.002 +/- 0.0005

[Fri May 18 11:49:14 2012] Off-axis axis estimate = 13.08'
[Fri May 18 22:43:34 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Fri May 18 22:43:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 22:43:34 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Fri May 18 22:43:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.846
[Fri May 18 22:43:34 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.97"
[Sat May 19 16:01:46 2012] fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 19 16:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11.csv
[Sat May 19 16:01:46 2012] fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 19 16:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11.csv
[Sat May 19 16:01:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 16:01:46 2012] fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 19 16:01:46 2012] fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 19 16:01:46 2012] Fit fullrun_mos2_xmm0129341601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat May 19 16:01:58 2012] Spatial fit model total counts = 241.463000, observed total counts = 229.000000
[Sat May 19 16:01:58 2012] Offset between fit and detection position for source 12 = 0.190358 pixels
[Sat May 19 16:01:58 2012] 244.897800 total counts/ 207.739000 bgd. counts: snr = 2.578117
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.190358 pixels
  Position = (234.6, 467.2) = 5 25 50.72 -69 27 33.7
  Extent = 5.0 (3.6-8.0)", rotation angle = 0
  Source counts = 37.2 +/- 15.6
  Background counts = 207.7
  Rate = 0.002 +/- 0.0007
[Sat May 19 16:01:58 2012] Vigneting correction estimate = 1.000000
[Sat May 19 16:01:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 16:01:58 2012] Assessing source extent using major axis lower bound
[Sat May 19 16:01:58 2012] Source does appear to be extended
[Sat May 19 16:01:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 16:01:58 2012] Deleting source due to low Poisson probability 0.6