[Sat Jun 15 00:48:32 2013] Detection parameters:
  Position = (253.1, 271.3) = 5 25 54.18 -69 40 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.6 +/- 25.7
  Background counts = 88.7
  Rate = 0.02 +/- 0.001

[Sat Jun 15 00:48:36 2013] Off-axis axis estimate = 3.83'
[Sat Jun 15 00:49:14 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 00:49:14 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 15 00:49:14 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Sat Jun 15 00:49:14 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.35"
[Sat Jun 15 00:49:16 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 15 00:49:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 00:49:16 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 15 00:49:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 00:49:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 00:49:19 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 15 00:49:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 00:49:19 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 15 00:49:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 00:49:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 00:49:44 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.334657 pixels away
[Sat Jun 15 00:49:44 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 00:49:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 00:49:44 2013] Assessing source extent using major
[Sat Jun 15 00:49:44 2013] Source does appear to be extended
[Sat Jun 15 00:49:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 00:50:09 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 00:50:09 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sat Jun 15 00:50:09 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Sat Jun 15 00:50:09 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.35"
[Sat Jun 15 00:50:11 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 15 00:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 00:50:11 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 15 00:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 00:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 00:50:11 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 15 00:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 00:50:11 2013] fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 15 00:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 00:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:25:14 2013] Source 12 is offset by 7.757785 and -1.874480 pixels which is larger than
2 X fitted extent = 0.959228 x 0.959228, not incorporating fit results
[Sat Jun 15 02:25:14 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 66.298989 pixels away
[Sat Jun 15 02:25:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:25:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:25:14 2013] Assessing source extent using major
[Sat Jun 15 02:25:14 2013] Source does appear to be extended
[Sat Jun 15 02:25:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:25:28 2013] XMMSAS src. selection expression = ellipse(21969.805313, 23550.725250, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 02:25:28 2013] Writing source region out to fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 15 02:25:28 2013] Extracting stamp from image fullrun_pn_xmm0129341501_pi300-10000_cl_sm2.00.img.gz, (216, 234) - (291, 309)
[Sat Jun 15 02:25:28 2013] XMMSAS bgd. selection expression = annulus(21969.805313, 23550.725250, 1087.500000, 2175.000000, X, Y) && !ellipse(27471.598000, 25376.750000, 7021.536202, 7021.536202, 0.000000, X, Y) && !ellipse(27280.193400, 25081.784000, 6778.512195, 6778.512195, 0.000000, X, Y) && !ellipse(27386.214600, 25768.351000, 3389.256098, 3389.256098, 0.000000, X, Y) && !ellipse(26560.072000, 25962.720800, 3185.520092, 3185.520092, 0.000000, X, Y) && !ellipse(23148.862671, 26421.157074, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 02:25:28 2013] Writing fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12.gif
[Sat Jun 15 03:17:18 2013] Mean detx,y = (-4392.86, 4660.44) 
[Sat Jun 15 03:17:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 03:17:41 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 03:17:42 2013] Setting source spectrum file to fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 15 03:17:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jun 17 07:45:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 07:45:34 2013] rmf not generated due to insufficient counts
[Wed Jun 19 14:08:02 2013] Updating aperture counts using extracted products
[Wed Jun 19 14:08:02 2013] Total counts from fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 790.00
[Wed Jun 19 14:08:02 2013] Total counts from fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_bgd.pi.gz = 934.00
[Wed Jun 19 14:08:02 2013] Got source and background scale factors 1216494.000000, 2593600.000000
[Wed Jun 19 14:08:02 2013] User source parameters:
  Position = (253.1, 271.3) = 5 25 54.18 -69 40 18.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 351.9 +/- 29.1
  Background aperture counts = 438.1
  Rate = 0.01 +/- 0.001

[Wed Jun 19 14:08:02 2013] Updating counts from extracted products
[Wed Jun 19 14:08:02 2013] Set source signif. to 351.92/20.93 = 16.81
[Wed Jun 19 14:08:03 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 14:08:03 2013] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12.arf
[Wed Jun 19 14:08:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 14:08:03 2013] Updating source flux to 6.7e-14
[Wed Jun 19 14:08:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 14:08:15 2013] xmm0129341501/analysis//spectral/fullrun_pn_xmm0129341501_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete