[Sun Jun 17 14:35:47 2012] Detection parameters:
  Position = (319.2, 287.1) = 5 24 49.36 -69 38 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 712.6 +/- 51.7
  Background counts = 60.8
  Rate = 0.03 +/- 0.002

[Sun Jun 17 14:35:47 2012] Off-axis axis estimate = 1.71'
[Mon Jun 18 21:58:49 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:58:49 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jun 18 21:58:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.793
[Mon Jun 18 21:58:49 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.29"
[Tue Jun 19 03:53:29 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 19 03:53:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6.csv
[Tue Jun 19 03:53:29 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 19 03:53:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6.csv
[Tue Jun 19 03:53:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 03:53:29 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 19 03:53:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 19 03:53:29 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 19 03:53:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 19 03:53:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 13:29:01 2012] Source 4 is offset by 6.902727 and 3.052214 pixels which is larger than
2 X fitted extent = 3.658736 x 3.658736, not incorporating fit results
[Wed Jun 20 13:29:01 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 13:29:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 13:29:01 2012] Assessing source extent using major
[Wed Jun 20 13:29:01 2012] Source does appear to be extended
[Wed Jun 20 13:29:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 13:29:01 2012] Source is confused with source 8
[Wed Jun 20 21:28:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:28:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jun 20 21:28:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.793
[Wed Jun 20 21:28:18 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.29"
[Thu Jun 21 06:20:13 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 21 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6.csv
[Thu Jun 21 06:20:13 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 21 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6.csv
[Thu Jun 21 06:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 06:20:13 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 21 06:20:13 2012] fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 21 06:20:13 2012] Fit fullrun_mos1_xmm0129341401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jun 21 15:35:21 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.112276 pixels away
[Thu Jun 21 15:35:21 2012] Source 4 is offset by 6.902727 and 2.901180 pixels which is larger than
2 X fitted extent = 3.733476 x 3.733476, not incorporating fit results
[Thu Jun 21 15:35:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 15:35:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 15:35:21 2012] Assessing source extent using major
[Thu Jun 21 15:35:21 2012] Source does appear to be extended
[Thu Jun 21 15:35:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 09:52:01 2012] XMMSAS src. selection expression = ellipse(27722.153290, 24930.084656, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 09:52:01 2012] Writing source region out to fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 24 09:52:01 2012] Extracting stamp from image fullrun_mos1_xmm0129341401_pi300-10000_cl_sm2.00.img.gz, (282, 250) - (357, 325)
[Sun Jun 24 09:52:01 2012] XMMSAS bgd. selection expression = annulus(27722.153290, 24930.084656, 1087.500000, 2175.000000, X, Y) && !ellipse(26276.084000, 23994.725200, 3516.000101, 3516.000101, 0.000000, X, Y) && !ellipse(26335.411800, 24150.652800, 6187.344178, 6187.344178, 0.000000, X, Y) && !ellipse(26693.434400, 24636.289400, 6009.408173, 6009.408173, 0.000000, X, Y) && !ellipse(25357.268250, 25002.020020, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27644.366000, 23219.436000, 1090.224031, 1090.224031, 0.000000, X, Y) && !ellipse(27549.571075, 25647.038147, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27248.501373, 22715.646851, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 09:52:01 2012] Writing fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4.gif
[Sun Jun 24 10:21:58 2012] Mean detx,y = (-364.73, 98.78) 
[Sun Jun 24 10:22:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 10:22:15 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 10:22:15 2012] Setting source spectrum file to fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 24 10:22:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 26 12:13:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 12:13:36 2012] rmf not generated due to insufficient counts
[Tue Jun 26 13:54:58 2012] Updating aperture counts using extracted products
[Tue Jun 26 13:54:58 2012] Error reading totcts from fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 26 13:54:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 13:54:58 2012] Using photon index=1.80, rate=0.0294, arf fullrun_mos1_xmm0129341401_pi300-10000_pass1_cl_src4.arf
[Tue Jun 26 13:54:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 13:54:58 2012] Updating source flux to 3e-13
[Tue Jun 26 13:55:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting