[Tue Aug 28 05:58:01 2012] Detection parameters:
  Position = (263.5, 294.3) = 5 25 11.73 -69 39 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4868.2 +/- 91.3
  Background counts = 55.3
  Rate = 0.8 +/- 0.01

[Tue Aug 28 05:58:01 2012] Off-axis axis estimate = 2.55'
[Tue Aug 28 06:00:44 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:00:44 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Aug 28 06:00:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.018
[Tue Aug 28 06:00:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.70"
[Tue Aug 28 13:09:05 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 28 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 28 13:09:05 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 28 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 28 13:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Aug 28 13:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 20:22:49 2012] Spatial fit model total counts = 91265.700000, observed total counts = 71365.000000
[Tue Aug 28 20:22:49 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 20:22:49 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:22:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:22:49 2012] Assessing source extent using major
[Tue Aug 28 20:22:49 2012] Source does appear to be extended
[Tue Aug 28 20:22:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 20:22:58 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:22:58 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Aug 28 20:22:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.018
[Tue Aug 28 20:22:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.70"
[Wed Aug 29 00:48:12 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 29 00:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:48:12 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 29 00:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 29 00:48:13 2012] Fit fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 29 18:56:03 2012] Source 4 is offset by -0.374415 and 6.247127 pixels which is larger than
2 X fitted extent = 5.984966 x 5.984966, not incorporating fit results
[Wed Aug 29 18:56:03 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 18:56:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 18:56:03 2012] Assessing source extent using major
[Wed Aug 29 18:56:03 2012] Source does appear to be extended
[Wed Aug 29 18:56:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 18:56:03 2012] Source is confused with source 1
[Wed Aug 29 18:56:10 2012] Counts = 4868.185059, rescaling region sizes by 2.000000
[Wed Aug 29 18:56:10 2012] XMMSAS src. selection expression = ellipse(22874.199890, 25553.974060, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug 29 18:56:10 2012] Writing source region out to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 29 18:56:10 2012] Extracting stamp from image fullrun_pn_xmm0129341101_pi300-10000_cl_sm2.00.img.gz, (188, 219) - (338, 369)
[Wed Aug 29 18:56:10 2012] XMMSAS bgd. selection expression = annulus(22874.199890, 25553.974060, 4350.000000, 8700.000000, X, Y) && !ellipse(23911.508000, 25767.512600, 6133.032176, 6133.032176, 0.000000, X, Y) && !ellipse(22827.212000, 26528.553800, 2162.517662, 2162.517662, 0.000000, X, Y) && !ellipse(23740.062000, 25985.516000, 3445.968099, 3445.968099, 160.837000, X, Y) && !ellipse(24482.728149, 26395.310364, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20081.604600, 29564.091000, 440.618413, 440.618413, 0.000000, X, Y) && !ellipse(33467.433845, 30815.830473, 3236.304093, 2200.270349, 324.099312, X, Y) && !ellipse(32724.398000, 30493.148000, 3221.568093, 3221.568093, 0.000000, X, Y) && !ellipse(32256.938000, 30436.700000, 1584.424046, 1584.424046, 0.000000, X, Y) && !ellipse(31789.259957, 29891.562388, 3236.304093, 2146.051038, 319.994967, X, Y) && !ellipse(31737.483400, 30356.527000, 1149.264033, 1149.264033, 0.000000, X, Y) && !ellipse(30486.574000, 29684.846000, 1394.856040, 1394.856040, 0.000000, X, Y) && !ellipse(31375.705807, 29816.394045, 3236.304093, 2645.784046, 319.628270, X, Y) && !ellipse(30233.964000, 29530.804000, 1429.016041, 1429.016041, 0.000000, X, Y) && !ellipse(29493.812400, 29214.578600, 1342.352039, 1342.352039, 0.000000, X, Y) && !ellipse(29794.966935, 28982.489919, 3236.304093, 2857.583310, 320.164826, X, Y) && !ellipse(29343.058000, 28832.748000, 2625.792076, 2625.792076, 0.000000, X, Y) && !ellipse(28872.352000, 28568.610000, 2684.704077, 2684.704077, 0.000000, X, Y) && !ellipse(28654.184000, 28418.610000, 1312.896038, 1312.896038, 0.000000, X, Y) && !ellipse(28243.496000, 28166.928000, 1271.896037, 1271.896037, 0.000000, X, Y) && !ellipse(27156.904000, 28207.412000, 2100.024060, 1791.536052, 125.485223, X, Y) && !ellipse(27777.514071, 27916.585170, 2100.024060, 1321.574421, 129.881486, X, Y) && !ellipse(27604.766000, 27571.550000, 1148.240033, 1148.240033, 0.000000, X, Y)
[Wed Aug 29 18:56:10 2012] Writing fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4.gif
[Wed Aug 29 19:12:22 2012] Mean detx,y = (8.78, -640.53) 
[Wed Aug 29 19:12:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 19:13:45 2012] grppha failed
[Wed Aug 29 19:13:45 2012] Setting source spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 29 19:13:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 29 20:48:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 29 20:48:09 2012] rmf not generated due to insufficient counts
[Wed Aug 29 21:00:43 2012] Updating aperture counts using extracted products
[Wed Aug 29 21:00:43 2012] Error reading totcts from fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 29 21:00:43 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 21:00:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 21:00:47 2012] xmm0129341101/analysis//spectral/fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete