[Tue Aug 28 05:58:01 2012] Detection parameters:
  Position = (336.0, 330.0) = 5 24 11.35 -69 36 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 453.1 +/- 30.4
  Background counts = 68.5
  Rate = 0.06 +/- 0.004

[Tue Aug 28 05:58:01 2012] Off-axis axis estimate = 3.55'
[Tue Aug 28 06:00:44 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:00:44 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Tue Aug 28 06:00:44 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Tue Aug 28 06:00:44 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.21"
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25.csv
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25.csv
[Tue Aug 28 13:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 13:09:07 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Aug 28 13:09:07 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Aug 28 13:09:07 2012] Fit fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Aug 28 20:22:49 2012] Warning, spatial fit 25 centroid is now closest to src. 27
[Tue Aug 28 20:22:49 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.429579 pixels away
[Tue Aug 28 20:22:49 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:22:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:22:49 2012] Assessing source extent using major
[Tue Aug 28 20:22:49 2012] Source does appear to be extended
[Tue Aug 28 20:22:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 20:22:49 2012] Source is confused with source 22
[Tue Aug 28 20:22:58 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:22:58 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Tue Aug 28 20:22:58 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Tue Aug 28 20:22:58 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.21"
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23.ximg exists
[Wed Aug 29 00:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23.csv
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Aug 29 00:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23.csv
[Wed Aug 29 00:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Aug 29 00:48:13 2012] Fit fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Aug 29 18:56:03 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 22.883341 pixels away
[Wed Aug 29 18:56:03 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 22.976178 pixels away
[Wed Aug 29 18:56:03 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 35.949409 pixels away
[Wed Aug 29 18:56:03 2012] Spatial fit model total counts = 6623.810000, observed total counts = 6620.000000
[Wed Aug 29 18:56:03 2012] Offset between fit and detection position for source 25 = 2.448479 pixels
[Wed Aug 29 18:56:03 2012] Warning, changing simple spatial fit ID from 23 to 20
[Wed Aug 29 18:56:03 2012] 5736.100000 total counts/ 1745.610000 bgd. counts: snr = 95.510829
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.448479 pixels
  Position = (337.5, 331.9) = 5 24 10.08 -69 36 21.9
  Extent = 35.7 (35.6-71.5)", rotation angle = 0
  Source counts = 3990.5 +/- 75.7
  Background counts = 1745.6
  Rate = 0.4 +/- 0.008
[Wed Aug 29 18:56:03 2012] Spatial fit model total counts = 3423.580000, observed total counts = 3411.000000
[Wed Aug 29 18:56:03 2012] Offset between fit and detection position for source 25 = 2.274161 pixels
[Wed Aug 29 18:56:03 2012] Warning, changing simple spatial fit ID from 20 to 23
[Wed Aug 29 18:56:03 2012] 2968.887000 total counts/ 2476.180000 bgd. counts: snr = 9.901423
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.274161 pixels
  Position = (338.8, 333.7) = 5 24 8.97 -69 36 13.8
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source counts = 492.7 +/- 54.5
  Background counts = 2476.2
  Rate = 0.05 +/- 0.006
[Wed Aug 29 18:56:03 2012] Spatial fit model total counts = 6339.870000, observed total counts = 6328.000000
[Wed Aug 29 18:56:03 2012] Offset between fit and detection position for source 25 = 2.027468 pixels
[Wed Aug 29 18:56:03 2012] Warning, changing simple spatial fit ID from 23 to 25
[Wed Aug 29 18:56:03 2012] 5916.780000 total counts/ 1080.990000 bgd. counts: snr = 147.081007
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.027468 pixels
  Position = (337.8, 332.0) = 5 24 9.79 -69 36 21.5
  Extent = 32.8 (32.7-65.6)", rotation angle = 0
  Source counts = 4835.8 +/- 76.9
  Background counts = 1081.0
  Rate = 0.5 +/- 0.008
[Wed Aug 29 18:56:03 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 18:56:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 18:56:03 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 18:56:03 2012] Source does appear to be extended
[Wed Aug 29 18:56:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 18:56:11 2012] Counts = 4835.790000, rescaling region sizes by 2.000000
[Wed Aug 29 18:56:11 2012] XMMSAS src. selection expression = ellipse(29343.058000, 28832.748000, 3938.688113, 3938.688113, 0.000000, X, Y)
[Wed Aug 29 18:56:11 2012] Writing source region out to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25_src.reg
[Wed Aug 29 18:56:11 2012] Extracting stamp from image fullrun_pn_xmm0129341101_pi300-10000_cl_sm2.00.img.gz, (111, 106) - (564, 558)
[Wed Aug 29 18:56:11 2012] XMMSAS bgd. selection expression = annulus(29343.058000, 28832.748000, 13128.960378, 26257.920756, X, Y) && !ellipse(23911.508000, 25767.512600, 6133.032176, 6133.032176, 0.000000, X, Y) && !ellipse(22827.212000, 26528.553800, 2162.517662, 2162.517662, 0.000000, X, Y) && !ellipse(23740.062000, 25985.516000, 3445.968099, 3445.968099, 160.837000, X, Y) && !ellipse(22874.199890, 25553.974060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24482.728149, 26395.310364, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20081.604600, 29564.091000, 440.618413, 440.618413, 0.000000, X, Y) && !ellipse(35485.492039, 32304.048829, 1822.864052, 1287.010381, 320.230321, X, Y) && !ellipse(36279.388000, 32824.594000, 3588.144103, 2859.248082, 215.636000, X, Y) && !ellipse(35058.752000, 32035.878000, 1794.072052, 1794.072052, 0.000000, X, Y) && !ellipse(34601.884000, 32057.163000, 1822.864052, 1003.880029, 322.444000, X, Y) && !ellipse(34890.716000, 31670.492000, 3109.872089, 2200.144063, 149.465000, X, Y) && !ellipse(34448.322000, 31111.730625, 1693.752049, 1693.752049, 0.000000, X, Y) && !ellipse(33752.428000, 31021.422000, 1618.152047, 1618.152047, 0.000000, X, Y) && !ellipse(33467.433845, 30815.830473, 3236.304093, 2200.270349, 324.099312, X, Y) && !ellipse(32724.398000, 30493.148000, 3221.568093, 3221.568093, 0.000000, X, Y) && !ellipse(32256.938000, 30436.700000, 1584.424046, 1584.424046, 0.000000, X, Y) && !ellipse(31789.259957, 29891.562388, 3236.304093, 2146.051038, 319.994967, X, Y) && !ellipse(31737.483400, 30356.527000, 1149.264033, 1149.264033, 0.000000, X, Y) && !ellipse(30486.574000, 29684.846000, 1394.856040, 1394.856040, 0.000000, X, Y) && !ellipse(31375.705807, 29816.394045, 3236.304093, 2645.784046, 319.628270, X, Y) && !ellipse(30233.964000, 29530.804000, 1429.016041, 1429.016041, 0.000000, X, Y) && !ellipse(29493.812400, 29214.578600, 1342.352039, 1342.352039, 0.000000, X, Y) && !ellipse(29794.966935, 28982.489919, 3236.304093, 2857.583310, 320.164826, X, Y) && !ellipse(28872.352000, 28568.610000, 2684.704077, 2684.704077, 0.000000, X, Y) && !ellipse(28654.184000, 28418.610000, 1312.896038, 1312.896038, 0.000000, X, Y) && !ellipse(28243.496000, 28166.928000, 1271.896037, 1271.896037, 0.000000, X, Y) && !ellipse(27156.904000, 28207.412000, 2100.024060, 1791.536052, 125.485223, X, Y) && !ellipse(27777.514071, 27916.585170, 2100.024060, 1321.574421, 129.881486, X, Y) && !ellipse(27604.766000, 27571.550000, 1148.240033, 1148.240033, 0.000000, X, Y) && !ellipse(9875.422043, 24905.621216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36537.400000, 32487.216000, 1822.864052, 1822.864052, 0.000000, X, Y)
[Wed Aug 29 18:56:11 2012] Writing fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25.gif
[Wed Aug 29 20:20:39 2012] Mean detx,y = (48.05, 5430.41) 
[Wed Aug 29 20:20:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 20:27:50 2012] grppha failed
[Wed Aug 29 20:27:50 2012] Setting source spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25_src.pi.gz
[Wed Aug 29 20:27:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Aug 29 21:00:43 2012] Updating aperture counts using extracted products
[Wed Aug 29 21:00:43 2012] Error reading totcts from fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25_src.pi.gz
[Wed Aug 29 21:00:43 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 21:00:46 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Wed Aug 29 21:00:46 2012] Source 25 has no response, skipping
[Wed Aug 29 21:00:47 2012] xmm0129341101/analysis//spectral/fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete