[Tue Aug 28 05:58:00 2012] Detection parameters:
  Position = (272.9, 294.1) = 5 25 3.87 -69 39 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107827.6 +/- 379.5
  Background counts = 56.6
  Rate = 1e+01 +/- 0.05

[Tue Aug 28 05:58:01 2012] Off-axis axis estimate = 1.88'
[Tue Aug 28 06:00:44 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:00:44 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue Aug 28 06:00:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Tue Aug 28 06:00:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.37"
[Tue Aug 28 13:09:05 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 13:09:05 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 13:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 13:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 28 13:09:06 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 13:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 28 13:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 20:22:49 2012] Spatial fit model total counts = 258210.000000, observed total counts = 292271.000000
[Tue Aug 28 20:22:49 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 20:22:49 2012] Spatial fit model total counts = 273388.000000, observed total counts = 299114.000000
[Tue Aug 28 20:22:49 2012] Offset between fit and detection position for source 1 = 1.983979 pixels
[Tue Aug 28 20:22:49 2012] Warning, changing simple spatial fit ID from 1 to 3
[Tue Aug 28 20:22:49 2012] 284353.000000 total counts/ 25600.000000 bgd. counts: snr = 1617.206250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.983979 pixels
  Position = (274.7, 294.9) = 5 25 2.35 -69 39 3.0
  Extent = 14.4 (14.4-28.7)", rotation angle = 0
  Source counts = 258753.0 +/- 533.2
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.06
[Tue Aug 28 20:22:49 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:22:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:22:49 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 20:22:49 2012] Source does appear to be extended
[Tue Aug 28 20:22:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 20:22:49 2012] Source is confused with source 3
[Tue Aug 28 20:22:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:22:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 20:22:58 2012] Initial guess for spatial extent in simple fitting = 14.36"
[Tue Aug 28 20:22:58 2012] source mask rpix=3.3, npix_max = 57, mask sum = 63, frac = 1.090
[Tue Aug 28 20:22:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.36"
[Wed Aug 29 00:48:12 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 29 00:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 00:48:12 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 29 00:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 00:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 29 00:48:13 2012] fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 29 00:48:13 2012] Fit fullrun_pn_xmm0129341101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 29 18:56:03 2012] Spatial fit model total counts = 549280.000000, observed total counts = 555566.000000
[Wed Aug 29 18:56:03 2012] Offset between fit and detection position for source 1 = 1.972938 pixels
[Wed Aug 29 18:56:03 2012] 561944.600000 total counts/ 71039.600000 bgd. counts: snr = 1841.820073
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.972938 pixels
  Position = (275.4, 296.7) = 5 25 1.79 -69 38 54.9
  Extent = 25.6 (25.6-25.6)", rotation angle = 0
  Source counts = 490905.0 +/- 749.6
  Background counts = 71039.6
  Rate = 5e+01 +/- 0.08
[Wed Aug 29 18:56:03 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 18:56:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 18:56:03 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 18:56:03 2012] Source does appear to be extended
[Wed Aug 29 18:56:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 18:56:10 2012] Counts = 490905.000000, rescaling region sizes by 3.000000
[Wed Aug 29 18:56:10 2012] XMMSAS src. selection expression = ellipse(23911.508000, 25767.512600, 4599.774132, 4599.774132, 0.000000, X, Y)
[Wed Aug 29 18:56:10 2012] Writing source region out to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 29 18:56:10 2012] Extracting stamp from image fullrun_pn_xmm0129341101_pi300-10000_cl_sm2.00.img.gz, (11, 32) - (540, 561)
[Wed Aug 29 18:56:10 2012] XMMSAS bgd. selection expression = annulus(23911.508000, 25767.512600, 22998.870662, 45997.741324, X, Y) && !ellipse(22827.212000, 26528.553800, 2162.517662, 2162.517662, 0.000000, X, Y) && !ellipse(23740.062000, 25985.516000, 3445.968099, 3445.968099, 160.837000, X, Y) && !ellipse(22874.199890, 25553.974060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24482.728149, 26395.310364, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20081.604600, 29564.091000, 440.618413, 440.618413, 0.000000, X, Y) && !ellipse(35485.492039, 32304.048829, 1822.864052, 1287.010381, 320.230321, X, Y) && !ellipse(36279.388000, 32824.594000, 3588.144103, 2859.248082, 215.636000, X, Y) && !ellipse(35058.752000, 32035.878000, 1794.072052, 1794.072052, 0.000000, X, Y) && !ellipse(34601.884000, 32057.163000, 1822.864052, 1003.880029, 322.444000, X, Y) && !ellipse(34890.716000, 31670.492000, 3109.872089, 2200.144063, 149.465000, X, Y) && !ellipse(34448.322000, 31111.730625, 1693.752049, 1693.752049, 0.000000, X, Y) && !ellipse(33752.428000, 31021.422000, 1618.152047, 1618.152047, 0.000000, X, Y) && !ellipse(33467.433845, 30815.830473, 3236.304093, 2200.270349, 324.099312, X, Y) && !ellipse(32724.398000, 30493.148000, 3221.568093, 3221.568093, 0.000000, X, Y) && !ellipse(32256.938000, 30436.700000, 1584.424046, 1584.424046, 0.000000, X, Y) && !ellipse(31789.259957, 29891.562388, 3236.304093, 2146.051038, 319.994967, X, Y) && !ellipse(31737.483400, 30356.527000, 1149.264033, 1149.264033, 0.000000, X, Y) && !ellipse(30486.574000, 29684.846000, 1394.856040, 1394.856040, 0.000000, X, Y) && !ellipse(31375.705807, 29816.394045, 3236.304093, 2645.784046, 319.628270, X, Y) && !ellipse(30233.964000, 29530.804000, 1429.016041, 1429.016041, 0.000000, X, Y) && !ellipse(29493.812400, 29214.578600, 1342.352039, 1342.352039, 0.000000, X, Y) && !ellipse(29794.966935, 28982.489919, 3236.304093, 2857.583310, 320.164826, X, Y) && !ellipse(29343.058000, 28832.748000, 2625.792076, 2625.792076, 0.000000, X, Y) && !ellipse(28872.352000, 28568.610000, 2684.704077, 2684.704077, 0.000000, X, Y) && !ellipse(28654.184000, 28418.610000, 1312.896038, 1312.896038, 0.000000, X, Y) && !ellipse(28243.496000, 28166.928000, 1271.896037, 1271.896037, 0.000000, X, Y) && !ellipse(27156.904000, 28207.412000, 2100.024060, 1791.536052, 125.485223, X, Y) && !ellipse(27777.514071, 27916.585170, 2100.024060, 1321.574421, 129.881486, X, Y) && !ellipse(27604.766000, 27571.550000, 1148.240033, 1148.240033, 0.000000, X, Y) && !ellipse(9875.422043, 24905.621216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36537.400000, 32487.216000, 1822.864052, 1822.864052, 0.000000, X, Y)
[Wed Aug 29 18:56:10 2012] Writing fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1.gif
[Wed Aug 29 18:56:37 2012] Mean detx,y = (44.83, -192.54) 
[Wed Aug 29 18:56:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 18:58:14 2012] grppha failed
[Wed Aug 29 18:58:15 2012] Setting source spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 18:58:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 29 21:00:43 2012] Updating aperture counts using extracted products
[Wed Aug 29 21:00:43 2012] Error reading totcts from fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 21:00:43 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 21:00:46 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Aug 29 21:00:46 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Aug 29 21:00:46 2012] Source 1 has no response, skipping
[Wed Aug 29 21:00:47 2012] xmm0129341101/analysis//spectral/fullrun_pn_xmm0129341101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete