[Tue Aug 28 10:34:37 2012] Detection parameters:
  Position = (304.3, 266.1) = 5 24 45.09 -69 40 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.0 +/- 20.3
  Background counts = 42.6
  Rate = 0.004 +/- 0.0009

[Tue Aug 28 10:34:37 2012] Off-axis axis estimate = 2.39'
[Tue Aug 28 20:46:31 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:46:31 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Tue Aug 28 20:46:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Tue Aug 28 20:46:31 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.62"
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11.csv
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11.csv
[Tue Aug 28 23:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 28 23:43:24 2012] Fit fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Aug 29 04:46:31 2012] Spatial fit model total counts = 2384.520000, observed total counts = 2393.000000
[Wed Aug 29 04:46:31 2012] Offset between fit and detection position for source 16 = 6.409571 pixels
[Wed Aug 29 04:46:31 2012] 2381.625000 total counts/ 1932.810000 bgd. counts: snr = 10.208755
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.409571 pixels
  Position = (308.4, 261.2) = 5 24 41.59 -69 40 29.4
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 448.8 +/- 48.8
  Background counts = 1932.8
  Rate = 0.02 +/- 0.002
[Wed Aug 29 04:46:31 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 04:46:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 04:46:31 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 04:46:31 2012] Source does appear to be extended
[Wed Aug 29 04:46:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 10:19:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 10:19:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 10:19:32 2012] Initial guess for spatial extent in simple fitting = 15.24"
[Wed Aug 29 10:19:32 2012] source mask rpix=3.5, npix_max = 64, mask sum = 51, frac = 0.795
[Wed Aug 29 10:19:32 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 15.24"
[Wed Aug 29 12:39:03 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug 29 12:39:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7.csv
[Wed Aug 29 12:39:03 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug 29 12:39:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7.csv
[Wed Aug 29 12:39:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 12:39:03 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug 29 12:39:03 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug 29 12:39:03 2012] Fit fullrun_mos1_xmm0129340901_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Aug 29 14:04:37 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Wed Aug 29 14:04:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 14:04:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 14:04:37 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 14:04:37 2012] Source does appear to be extended
[Wed Aug 29 14:04:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 14:04:37 2012] Source is confused with source 6
[Wed Aug 29 14:26:43 2012] XMMSAS src. selection expression = ellipse(26786.262000, 22676.628000, 914.532026, 914.532026, 0.000000, X, Y)
[Wed Aug 29 14:26:43 2012] Writing source region out to fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16_src.reg
[Wed Aug 29 14:26:43 2012] Extracting stamp from image fullrun_mos1_xmm0129340901_pi300-10000_cl_sm2.00.img.gz, (256, 209) - (361, 314)
[Wed Aug 29 14:26:43 2012] XMMSAS bgd. selection expression = annulus(26786.262000, 22676.628000, 1524.220044, 3048.440088, X, Y) && !ellipse(24545.212000, 24569.388000, 6931.488199, 4778.664138, 9.295000, X, Y) && !ellipse(24927.452800, 24350.336000, 3465.744100, 3465.744100, 343.094300, X, Y) && !ellipse(25272.214386, 25178.133423, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23636.795990, 25354.658356, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25621.976000, 23680.706000, 2438.520070, 2438.520070, 0.000000, X, Y)
[Wed Aug 29 14:26:43 2012] Writing fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16.gif
[Wed Aug 29 14:47:18 2012] Mean detx,y = (1377.25, 185.41) 
[Wed Aug 29 14:47:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 14:47:28 2012] grppha failed
[Wed Aug 29 14:47:28 2012] Setting source spectrum file to fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Aug 29 14:47:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Aug 29 15:19:59 2012] Updating aperture counts using extracted products
[Wed Aug 29 15:19:59 2012] Error reading totcts from fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Aug 29 15:19:59 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 15:20:00 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Wed Aug 29 15:20:00 2012] Source 16 has no response, skipping
[Wed Aug 29 15:20:01 2012] xmm0129340901/analysis//spectral/fullrun_mos1_xmm0129340901_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete