[Tue Aug 28 10:34:37 2012] Detection parameters:
  Position = (314.8, 306.9) = 5 24 36.29 -69 37 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 13.4
  Background counts = 31.4
  Rate = 0.003 +/- 0.0007

[Tue Aug 28 10:34:37 2012] Off-axis axis estimate = 1.34'
[Tue Aug 28 20:46:31 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:46:31 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Aug 28 20:46:31 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Tue Aug 28 20:46:31 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.10"
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 23:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Aug 28 23:43:24 2012] fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Aug 28 23:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Aug 28 23:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0129340901_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 04:46:31 2012] Source 14 is offset by 2.568195 and 5.363233 pixels which is larger than
2 X fitted extent = 2.997274 x 2.997274, not incorporating fit results
[Wed Aug 29 04:46:31 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 04:46:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 04:46:31 2012] Assessing source extent using major
[Wed Aug 29 04:46:31 2012] Source does appear to be extended
[Wed Aug 29 04:46:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 04:46:31 2012] Deleting source due to low Poisson probability 0.7