[Wed May 30 15:47:59 2012] Detection parameters:
  Position = (285.0, 360.1) = 10 44 52.18 21 37 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1198.6 +/- 43.1
  Background counts = 106.6
  Rate = 0.02 +/- 0.0008

[Wed May 30 15:48:00 2012] Off-axis axis estimate = 4.58'
[Wed May 30 15:53:13 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Wed May 30 15:53:13 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Wed May 30 15:53:13 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Wed May 30 15:53:13 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.72"
[Wed May 30 17:22:35 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 30 17:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9.csv
[Wed May 30 17:22:35 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 30 17:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9.csv
[Wed May 30 17:22:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 17:22:36 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 30 17:22:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 30 17:22:36 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 30 17:22:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 30 17:22:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:12:59 2012] Warning, spatial fit 9 centroid is now closest to src. 29
[Wed May 30 19:13:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 19:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 19:13:00 2012] Assessing source extent using major
[Wed May 30 19:13:00 2012] Source does appear to be extended
[Wed May 30 19:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 19:13:33 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:13:33 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Wed May 30 19:13:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Wed May 30 19:13:33 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.72"
[Wed May 30 20:49:39 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 30 20:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9.csv
[Wed May 30 20:49:39 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 30 20:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9.csv
[Wed May 30 20:49:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 20:49:40 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 30 20:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 30 20:49:40 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 30 20:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 30 20:49:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:30:09 2012] Spatial fit model total counts = 1723.630000, observed total counts = 1515.000000
[Wed May 30 22:30:09 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 22:30:09 2012] Vigneting correction estimate = 1.000000
[Wed May 30 22:30:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 22:30:09 2012] Assessing source extent using major
[Wed May 30 22:30:09 2012] Source does appear to be extended
[Wed May 30 22:30:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 22:30:41 2012] Counts = 1198.623657, rescaling region sizes by 2.000000
[Wed May 30 22:30:41 2012] XMMSAS src. selection expression = ellipse(24748.188599, 31284.419373, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 30 22:30:41 2012] Writing source region out to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9_src.reg
[Wed May 30 22:30:41 2012] Extracting stamp from image fullrun_pn_xmm0128531601_pi300-10000_cl_sm2.00.img.gz, (210, 285) - (360, 435)
[Wed May 30 22:30:41 2012] XMMSAS bgd. selection expression = annulus(24748.188599, 31284.419373, 4350.000000, 8700.000000, X, Y) && !ellipse(21195.943400, 33032.905200, 785.727223, 497.980814, 26.443360, X, Y) && !ellipse(30974.885437, 35705.051117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18364.855652, 33157.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16452.837631, 25773.998993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.537933, 24390.933167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33176.180847, 22930.218353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27908.939911, 36762.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30959.788940, 37872.380737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33322.502167, 36666.593872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22496.338540, 36550.981600, 447.622413, 447.622413, 0.000000, X, Y) && !ellipse(20015.635200, 35415.525000, 435.009613, 435.009613, 0.000000, X, Y) && !ellipse(33751.981200, 33905.344200, 488.765614, 262.429608, 47.921000, X, Y) && !ellipse(30968.048737, 33428.416595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26882.314423, 32810.469147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23440.850132, 32041.006200, 498.186414, 498.186414, 0.000000, X, Y) && !ellipse(32390.207214, 31359.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26413.598206, 29239.576874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.222595, 28783.968536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19827.366592, 28441.467102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18535.145248, 27820.092010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26073.313721, 27245.294098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31465.240143, 26943.587189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24756.966840, 25941.461600, 356.843210, 356.843210, 0.000000, X, Y) && !ellipse(25658.172400, 25430.018600, 650.004819, 310.639209, 123.705000, X, Y) && !ellipse(25007.457520, 24859.885681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23343.700960, 24957.029200, 437.276013, 365.604811, 337.626309, X, Y) && !ellipse(20193.069000, 24887.330719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18919.318143, 24648.548954, 1914.208055, 427.624660, 167.868072, X, Y) && !ellipse(19409.188773, 24142.462867, 394.430691, 344.620362, 354.193635, X, Y)
[Wed May 30 22:30:41 2012] Writing fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9.gif
[Wed May 30 22:43:51 2012] Mean detx,y = (-1674.78, 6925.42) 
[Wed May 30 22:44:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 22:45:49 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 22:45:49 2012] Setting source spectrum file to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 30 22:45:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 30 23:51:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 23:51:32 2012] rmf not generated due to insufficient counts
[Thu May 31 02:22:18 2012] Updating aperture counts using extracted products
[Thu May 31 02:22:18 2012] Error reading totcts from fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu May 31 02:22:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:22:19 2012] Using photon index=1.80, rate=0.0225, arf fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src9.arf
[Thu May 31 02:22:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:22:19 2012] Updating source flux to 7.4e-14
[Thu May 31 02:24:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting