[Wed May 30 15:47:59 2012] Detection parameters:
  Position = (300.3, 313.7) = 10 44 47.43 21 34 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.8 +/- 18.3
  Background counts = 111.2
  Rate = 0.002 +/- 0.0003

[Wed May 30 15:48:00 2012] Off-axis axis estimate = 1.12'
[Wed May 30 15:53:13 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed May 30 15:53:13 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed May 30 15:53:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed May 30 15:53:13 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 6.99"
[Wed May 30 17:22:35 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src38.ximg exists
[Wed May 30 17:22:35 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed May 30 17:22:35 2012] Fit fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_src38 appears to have run properly
[Wed May 30 17:22:36 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed May 30 17:22:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 30 17:22:36 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed May 30 17:22:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 30 17:22:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:13:00 2012] Source 39 is offset by 6.675146 and 6.146185 pixels which is larger than
2 X fitted extent = 0.803048 x 0.803048, not incorporating fit results
[Wed May 30 19:13:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 19:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 19:13:00 2012] Assessing source extent using major
[Wed May 30 19:13:00 2012] Source does appear to be extended
[Wed May 30 19:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 19:13:33 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:13:33 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed May 30 19:13:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed May 30 19:13:33 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 6.99"
[Wed May 30 20:49:39 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38.ximg exists
[Wed May 30 20:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38.csv
[Wed May 30 20:49:39 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed May 30 20:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38.csv
[Wed May 30 20:49:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 20:49:40 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed May 30 20:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 30 20:49:40 2012] fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May 30 20:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 30 20:49:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:30:09 2012] Source 39 is offset by 6.675146 and 5.345013 pixels which is larger than
2 X fitted extent = 1.274583 x 1.274583, not incorporating fit results
[Wed May 30 22:30:09 2012] Vigneting correction estimate = 1.000000
[Wed May 30 22:30:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 22:30:09 2012] Assessing source extent using major
[Wed May 30 22:30:09 2012] Source does appear to be extended
[Wed May 30 22:30:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 22:30:41 2012] XMMSAS src. selection expression = ellipse(26073.313721, 27245.294098, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 22:30:41 2012] Writing source region out to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39_src.reg
[Wed May 30 22:30:41 2012] Extracting stamp from image fullrun_pn_xmm0128531601_pi300-10000_cl_sm2.00.img.gz, (263, 276) - (338, 351)
[Wed May 30 22:30:41 2012] XMMSAS bgd. selection expression = annulus(26073.313721, 27245.294098, 1087.500000, 2175.000000, X, Y) && !ellipse(25527.537933, 24390.933167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26413.598206, 29239.576874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.222595, 28783.968536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24756.966840, 25941.461600, 356.843210, 356.843210, 0.000000, X, Y) && !ellipse(25658.172400, 25430.018600, 650.004819, 310.639209, 123.705000, X, Y) && !ellipse(25007.457520, 24859.885681, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 22:30:41 2012] Writing fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39.gif
[Wed May 30 23:11:20 2012] Mean detx,y = (-1580.60, 2698.71) 
[Wed May 30 23:11:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 23:11:46 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 23:11:46 2012] Setting source spectrum file to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed May 30 23:11:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu May 31 00:12:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 00:12:04 2012] rmf not generated due to insufficient counts
[Thu May 31 02:22:18 2012] Updating aperture counts using extracted products
[Thu May 31 02:22:18 2012] Error reading totcts from fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu May 31 02:22:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:22:20 2012] Using photon index=1.80, rate=0.0015, arf fullrun_pn_xmm0128531601_pi300-10000_pass1_cl_src39.arf
[Thu May 31 02:22:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:22:20 2012] Updating source flux to 4.5e-15
[Thu May 31 02:24:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting