[Wed May 30 15:48:59 2012] Detection parameters:
  Position = (284.5, 360.6) = 10 44 52.35 21 37 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 514.0 +/- 28.2
  Background counts = 51.2
  Rate = 0.008 +/- 0.0005

[Wed May 30 15:49:00 2012] Off-axis axis estimate = 4.62'
[Wed May 30 18:17:22 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:17:22 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Wed May 30 18:17:22 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.874
[Wed May 30 18:17:22 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.74"
[Wed May 30 19:12:40 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 30 19:12:40 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 30 19:12:40 2012] Fit fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed May 30 19:12:42 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 30 19:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 30 19:12:42 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 30 19:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 30 19:12:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:13:17 2012] Spatial fit model total counts = 684.484000, observed total counts = 629.000000
[Wed May 30 19:13:17 2012] Offset between fit and detection position for source 7 = 0.169489 pixels
[Wed May 30 19:13:17 2012] 684.561000 total counts/ 333.802000 bgd. counts: snr = 19.198370
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.169489 pixels
  Position = (284.3, 360.6) = 10 44 52.40 21 37 28.7
  Extent = 6.7 (5.9-7.6)" x 4.5 (3.9-5.2)", rotation angle = 356 (343-8) degrees
  Source counts = 350.8 +/- 26.2
  Background counts = 333.8
  Rate = 0.004 +/- 0.0003
[Wed May 30 19:13:17 2012] Vigneting correction estimate = 1.000000
[Wed May 30 19:13:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 19:13:17 2012] Assessing source extent using major axis lower bound
[Wed May 30 19:13:17 2012] Source does appear to be extended
[Wed May 30 19:13:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Wed May 30 21:37:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 21:37:59 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Wed May 30 21:37:59 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.704
[Wed May 30 21:37:59 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.60"
[Wed May 30 22:29:55 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 30 22:29:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4.csv
[Wed May 30 22:29:55 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 30 22:29:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4.csv
[Wed May 30 22:29:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:29:56 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 30 22:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 30 22:29:56 2012] fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 30 22:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 30 22:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:30:25 2012] Spatial fit model total counts = 707.319000, observed total counts = 629.000000
[Wed May 30 22:30:25 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 22:30:25 2012] Vigneting correction estimate = 1.000000
[Wed May 30 22:30:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 22:30:25 2012] Assessing source extent using major axis lower bound
[Wed May 30 22:30:25 2012] Source does appear to be extended
[Wed May 30 22:30:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Thu May 31 01:31:31 2012] XMMSAS src. selection expression = ellipse(24687.447000, 31320.998800, 402.723612, 269.743208, 356.200083, X, Y)
[Thu May 31 01:31:31 2012] Writing source region out to fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_src.reg
[Thu May 31 01:31:31 2012] Extracting stamp from image fullrun_mos2_xmm0128531601_pi300-10000_cl_sm2.00.img.gz, (261, 337) - (307, 384)
[Thu May 31 01:31:31 2012] XMMSAS bgd. selection expression = annulus(24687.447000, 31320.998800, 671.206019, 1342.412039, X, Y)
[Thu May 31 01:31:31 2012] Writing fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7.gif
[Thu May 31 01:34:59 2012] Mean detx,y = (1777.19, -7135.28) 
[Thu May 31 01:35:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:35:07 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:35:07 2012] Setting source spectrum file to fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 01:35:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 31 02:22:22 2012] Updating aperture counts using extracted products
[Thu May 31 02:22:22 2012] Error reading totcts from fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 02:22:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:22:22 2012] Using photon index=1.80, rate=0.00437, arf fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7.arf
[Thu May 31 02:22:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:22:22 2012] Updating source flux to 6.8e-14
[Thu May 31 02:23:30 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Thu May 31 02:24:24 2012] Reading fit data from xmm0128531601/analysis//spectral/fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_pl.csv
[Thu May 31 02:24:24 2012] Spectral fit parameter nH value = 1.13131e+21
[Thu May 31 02:24:24 2012] Spectral fit parameter PhoIndex value = 1.44241
[Thu May 31 02:24:24 2012] Failed to get F(0.3-8.0) from xmm0128531601/analysis//spectral/fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Thu May 31 02:24:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:24:24 2012] Using Nh = 1.1e+21, photon index=1.44, rate=0.00437, arf fullrun_mos2_xmm0128531601_pi300-10000_pass1_cl_src7.arf
[Thu May 31 02:24:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:24:24 2012] Updating source flux to 9.2e-14