[Tue Jun 26 20:01:21 2012] Detection parameters:
  Position = (311.4, 513.6) = 10 44 46.86 21 45 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.4 +/- 15.2
  Background counts = 67.2
  Rate = 0.001 +/- 0.0002

[Tue Jun 26 20:01:22 2012] Off-axis axis estimate = 15.63'
[Wed Jun 27 00:10:42 2012] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 00:10:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 00:10:42 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Wed Jun 27 00:10:42 2012] source mask rpix=3.3, npix_max = 56, mask sum = 39, frac = 0.684
[Wed Jun 27 00:10:42 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 14.24"
[Wed Jun 27 01:06:41 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jun 27 01:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33.csv
[Wed Jun 27 01:06:41 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jun 27 01:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33.csv
[Wed Jun 27 01:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 01:06:41 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jun 27 01:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jun 27 01:06:41 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jun 27 01:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jun 27 01:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 01:07:09 2012] Source 2 is offset by -1.359119 and 6.852435 pixels which is larger than
2 X fitted extent = 3.554731 x 1.372418, not incorporating fit results
[Wed Jun 27 01:07:09 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 01:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 01:07:09 2012] Assessing source extent using major
[Wed Jun 27 01:07:09 2012] Source does appear to be extended
[Wed Jun 27 01:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 05:18:41 2012] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 05:18:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 05:18:41 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Wed Jun 27 05:18:41 2012] source mask rpix=3.3, npix_max = 56, mask sum = 39, frac = 0.684
[Wed Jun 27 05:18:41 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 14.24"
[Wed Jun 27 06:05:28 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33.ximg exists
[Wed Jun 27 06:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33.csv
[Wed Jun 27 06:05:28 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Jun 27 06:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33.csv
[Wed Jun 27 06:05:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:05:28 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Jun 27 06:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Jun 27 06:05:28 2012] fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Jun 27 06:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Jun 27 06:05:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:05:59 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.301122 pixels away
[Wed Jun 27 06:05:59 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 06:05:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 06:05:59 2012] Assessing source extent using major
[Wed Jun 27 06:05:59 2012] Source does appear to be extended
[Wed Jun 27 06:05:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:20:47 2012] XMMSAS src. selection expression = ellipse(27042.941040, 44636.152832, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 09:20:47 2012] Writing source region out to fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 27 09:20:47 2012] Extracting stamp from image fullrun_mos2_xmm0128531501_pi300-10000_cl_sm2.00.img.gz, (274, 476) - (349, 551)
[Wed Jun 27 09:20:47 2012] XMMSAS bgd. selection expression = annulus(27042.941040, 44636.152832, 1087.500000, 2175.000000, X, Y)
[Wed Jun 27 09:20:47 2012] Writing fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2.gif
[Wed Jun 27 09:29:49 2012] Mean detx,y = (-8043.18, 14507.82) 
[Wed Jun 27 09:29:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:30:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:30:08 2012] Setting source spectrum file to fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 27 09:30:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 27 09:53:31 2012] Not generating rmf since there are only 97 counts
[Wed Jun 27 09:53:31 2012] rmf not generated due to insufficient counts
[Wed Jun 27 10:00:45 2012] Updating aperture counts using extracted products
[Wed Jun 27 10:00:45 2012] Error reading totcts from fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 27 10:00:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 10:00:47 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0128531501_pi300-10000_pass1_cl_src2.arf
[Wed Jun 27 10:00:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 10:00:47 2012] Updating source flux to 6.5e-14
[Wed Jun 27 10:02:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting