[Tue Jun 26 20:00:54 2012] Detection parameters:
  Position = (397.9, 276.9) = 10 44 19.93 21 28 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 15.4
  Background counts = 74.3
  Rate = 0.002 +/- 0.0003

[Tue Jun 26 20:00:54 2012] Off-axis axis estimate = 7.37'
[Tue Jun 26 23:23:35 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 23:23:35 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Tue Jun 26 23:23:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.096
[Tue Jun 26 23:23:35 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 10.12"
[Wed Jun 27 00:10:41 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jun 27 00:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26.csv
[Wed Jun 27 00:10:41 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jun 27 00:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26.csv
[Wed Jun 27 00:10:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 00:10:41 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jun 27 00:10:41 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jun 27 00:10:41 2012] Fit fullrun_mos1_xmm0128531501_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jun 27 01:07:04 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.514416 pixels away
[Wed Jun 27 01:07:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 01:07:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 01:07:04 2012] Assessing source extent using major
[Wed Jun 27 01:07:04 2012] Source does appear to be extended
[Wed Jun 27 01:07:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 04:30:58 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 04:30:58 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Wed Jun 27 04:30:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.096
[Wed Jun 27 04:30:58 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.12"
[Wed Jun 27 05:18:40 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jun 27 05:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26.csv
[Wed Jun 27 05:18:40 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jun 27 05:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26.csv
[Wed Jun 27 05:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 05:18:40 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jun 27 05:18:40 2012] fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jun 27 05:18:40 2012] Fit fullrun_mos1_xmm0128531501_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Jun 27 06:05:53 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.078659 pixels away
[Wed Jun 27 06:05:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 06:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 06:05:53 2012] Assessing source extent using major
[Wed Jun 27 06:05:53 2012] Source does appear to be extended
[Wed Jun 27 06:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 08:35:31 2012] XMMSAS src. selection expression = ellipse(34564.572662, 24045.556335, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 08:35:31 2012] Writing source region out to fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30_src.reg
[Wed Jun 27 08:35:31 2012] Extracting stamp from image fullrun_mos1_xmm0128531501_pi300-10000_cl_sm2.00.img.gz, (360, 239) - (435, 314)
[Wed Jun 27 08:35:31 2012] XMMSAS bgd. selection expression = annulus(34564.572662, 24045.556335, 1087.500000, 2175.000000, X, Y) && !ellipse(34979.606842, 26903.071442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33631.993622, 26982.199280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35533.068939, 27571.578613, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jun 27 08:35:31 2012] Writing fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30.gif
[Wed Jun 27 08:43:19 2012] Mean detx,y = (-6984.37, 5499.56) 
[Wed Jun 27 08:43:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 08:43:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 08:43:40 2012] Setting source spectrum file to fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 27 08:43:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 27 09:19:35 2012] Not generating rmf since there are only 85 counts
[Wed Jun 27 09:19:35 2012] rmf not generated due to insufficient counts
[Wed Jun 27 10:00:41 2012] Updating aperture counts using extracted products
[Wed Jun 27 10:00:41 2012] Error reading totcts from fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 27 10:00:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 10:00:42 2012] Using photon index=1.80, rate=0.00163, arf fullrun_mos1_xmm0128531501_pi300-10000_pass1_cl_src30.arf
[Wed Jun 27 10:00:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 10:00:42 2012] Updating source flux to 2.4e-14
[Wed Jun 27 10:00:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting