[Fri Jun  8 10:14:55 2012] Detection parameters:
  Position = (218.5, 310.0) = 14 17 51.46 52 23 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.8 +/- 9.7
  Background counts = 4.1
  Rate = 0.005 +/- 0.0008

[Fri Jun  8 10:14:57 2012] Off-axis axis estimate = 5.86'
[Fri Jun  8 12:45:28 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 12:45:28 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Fri Jun  8 12:45:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.067
[Fri Jun  8 12:45:28 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.36"
[Fri Jun  8 13:56:54 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun  8 13:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8.csv
[Fri Jun  8 13:56:54 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun  8 13:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8.csv
[Fri Jun  8 13:56:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 13:56:55 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun  8 13:56:55 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun  8 13:56:55 2012] Fit fullrun_mos2_xmm0127921201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun  8 13:57:31 2012] Spatial fit model total counts = 95.173700, observed total counts = 92.000000
[Fri Jun  8 13:57:31 2012] Offset between fit and detection position for source 9 = 0.072413 pixels
[Fri Jun  8 13:57:31 2012] 93.987700 total counts/ 46.699200 bgd. counts: snr = 6.919916
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.072413 pixels
  Position = (218.4, 310.0) = 14 17 51.49 52 23 9.5
  Extent = 6.0 (4.6-7.6)", rotation angle = 0
  Source counts = 47.3 +/- 9.7
  Background counts = 46.7
  Rate = 0.003 +/- 0.0005
[Fri Jun  8 13:57:31 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 13:57:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 13:57:31 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 13:57:31 2012] Source does appear to be extended
[Fri Jun  8 13:57:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 16:12:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 16:12:24 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Fri Jun  8 16:12:24 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.856
[Fri Jun  8 16:12:24 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.97"
[Fri Jun  8 17:04:34 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun  8 17:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8.csv
[Fri Jun  8 17:04:34 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun  8 17:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8.csv
[Fri Jun  8 17:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 17:04:34 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun  8 17:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun  8 17:04:34 2012] fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun  8 17:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun  8 17:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127921201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 17:04:57 2012] Warning, spatial fit 8 centroid is now closest to src. 3
[Fri Jun  8 17:04:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 17:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 17:04:57 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 17:04:57 2012] Source does appear to be extended
[Fri Jun  8 17:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 18:26:45 2012] XMMSAS src. selection expression = ellipse(18952.908000, 26925.566200, 358.087210, 358.087210, 0.000000, X, Y)
[Fri Jun  8 18:26:45 2012] Writing source region out to fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun  8 18:26:45 2012] Extracting stamp from image fullrun_mos2_xmm0127921201_pi300-10000_cl_sm2.00.img.gz, (198, 289) - (239, 331)
[Fri Jun  8 18:26:45 2012] XMMSAS bgd. selection expression = annulus(18952.908000, 26925.566200, 596.812017, 1193.624034, X, Y)
[Fri Jun  8 18:26:45 2012] Writing fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9.gif
[Fri Jun  8 18:29:11 2012] Mean detx,y = (7414.90, 1637.14) 
[Fri Jun  8 18:29:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 18:29:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 18:29:31 2012] Setting source spectrum file to fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  8 18:29:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun  8 18:50:07 2012] Not generating rmf since there are only 47 counts
[Fri Jun  8 18:50:07 2012] rmf not generated due to insufficient counts
[Fri Jun  8 18:53:48 2012] Updating aperture counts using extracted products
[Fri Jun  8 18:53:48 2012] Error reading totcts from fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  8 18:53:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 18:53:50 2012] Using photon index=1.80, rate=0.00256, arf fullrun_mos2_xmm0127921201_pi300-10000_pass1_cl_src9.arf
[Fri Jun  8 18:53:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 18:53:50 2012] Updating source flux to 4.4e-14
[Fri Jun  8 18:54:30 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting