[Wed Aug  1 19:49:30 2012] Detection parameters:
  Position = (349.2, 342.0) = 14 16 49.68 52 25 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1625.1 +/- 48.8
  Background counts = 52.7
  Rate = 0.04 +/- 0.001

[Wed Aug  1 19:49:31 2012] Off-axis axis estimate = 4.85'
[Wed Aug  1 19:52:16 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 19:52:16 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Wed Aug  1 19:52:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.167
[Wed Aug  1 19:52:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.85"
[Wed Aug  1 21:32:29 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4.ximg exists
[Wed Aug  1 21:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 21:32:29 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Aug  1 21:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 21:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 21:32:30 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Aug  1 21:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 21:32:30 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Aug  1 21:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 21:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:52:37 2012] Spatial fit model total counts = 2183.700000, observed total counts = 1876.000000
[Wed Aug  1 23:52:37 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 23:52:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:52:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:52:37 2012] Assessing source extent using major
[Wed Aug  1 23:52:37 2012] Source does appear to be extended
[Wed Aug  1 23:52:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:53:11 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:53:11 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Wed Aug  1 23:53:11 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.167
[Wed Aug  1 23:53:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.85"
[Thu Aug  2 01:19:33 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src4.ximg exists
[Thu Aug  2 01:19:33 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Aug  2 01:19:33 2012] Fit fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Aug  2 01:19:34 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Aug  2 01:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Aug  2 01:19:34 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Aug  2 01:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Aug  2 01:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 03:26:14 2012] Spatial fit model total counts = 2051.990000, observed total counts = 1876.000000
[Thu Aug  2 03:26:14 2012] Offset between fit and detection position for source 5 = 0.498016 pixels
[Thu Aug  2 03:26:14 2012] 2482.310000 total counts/ 1204.250000 bgd. counts: snr = 36.829253
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.498016 pixels
  Position = (348.8, 341.7) = 14 16 49.87 52 25 28.2
  Extent = 7.0 (7.0-7.0)" x 5.7 (5.7-5.7)", rotation angle = 90 (90-90) degrees
  Source counts = 1278.1 +/- 49.8
  Background counts = 1204.2
  Rate = 0.02 +/- 0.001
[Thu Aug  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 03:26:14 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 03:26:14 2012] Source does appear to be extended
[Thu Aug  2 03:26:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Thu Aug  2 03:26:47 2012] Counts = 1278.060000, rescaling region sizes by 2.000000
[Thu Aug  2 03:26:47 2012] XMMSAS src. selection expression = ellipse(30300.615460, 29680.431800, 835.854024, 678.889220, 90.000000, X, Y)
[Thu Aug  2 03:26:47 2012] Writing source region out to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug  2 03:26:47 2012] Extracting stamp from image fullrun_pn_xmm0127921001_pi300-10000_cl_sm2.00.img.gz, (301, 294) - (397, 390)
[Thu Aug  2 03:26:47 2012] XMMSAS bgd. selection expression = annulus(30300.615460, 29680.431800, 2786.180080, 5572.360160, X, Y) && !ellipse(23909.371918, 35542.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29991.922200, 24023.717800, 402.059212, 402.059212, 0.000000, X, Y) && !ellipse(31102.547211, 33976.589874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.580444, 33277.518005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26400.885925, 29964.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31308.381012, 25872.596161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.912140, 23294.313141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34737.512620, 33560.201000, 319.584533, 319.584533, 0.000000, X, Y) && !ellipse(31525.442932, 29634.642578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.436890, 28880.985962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.918400, 28153.074200, 406.796012, 406.796012, 0.000000, X, Y) && !ellipse(32412.850000, 26863.194000, 406.069612, 406.069612, 0.000000, X, Y) && !ellipse(25626.278900, 26913.554200, 382.157611, 382.157611, 0.000000, X, Y) && !ellipse(33075.810120, 26233.300476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27623.367540, 25084.218400, 524.184199, 524.184199, 0.000000, X, Y)
[Thu Aug  2 03:26:47 2012] Writing fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5.gif
[Thu Aug  2 03:32:22 2012] Mean detx,y = (4367.15, -568.94) 
[Thu Aug  2 03:32:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 03:33:14 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 03:33:15 2012] Setting source spectrum file to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 03:33:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug  2 07:09:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 07:09:28 2012] Error reading totcts from fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 07:09:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 07:09:29 2012] Using photon index=1.80, rate=0.025, arf fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src5.arf
[Thu Aug  2 07:09:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 07:09:29 2012] Updating source flux to 7.1e-14
[Thu Aug  2 07:11:54 2012] Flag p found in src. 5 procflags, skipping spectral fitting