[Wed Aug  1 19:49:30 2012] Detection parameters:
  Position = (251.5, 410.7) = 14 17 36.20 52 30 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1371.8 +/- 45.7
  Background counts = 44.6
  Rate = 0.03 +/- 0.0009

[Wed Aug  1 19:49:31 2012] Off-axis axis estimate = 8.82'
[Wed Aug  1 19:52:16 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 19:52:16 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Aug  1 19:52:16 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed Aug  1 19:52:16 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.84"
[Wed Aug  1 21:32:29 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14.ximg exists
[Wed Aug  1 21:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14.csv
[Wed Aug  1 21:32:29 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Aug  1 21:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14.csv
[Wed Aug  1 21:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 21:32:30 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Aug  1 21:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Aug  1 21:32:30 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Aug  1 21:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Aug  1 21:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:52:37 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.614411 pixels away
[Wed Aug  1 23:52:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:52:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:52:37 2012] Assessing source extent using major
[Wed Aug  1 23:52:37 2012] Source does appear to be extended
[Wed Aug  1 23:52:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:53:11 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:53:11 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Aug  1 23:53:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed Aug  1 23:53:11 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 10.84"
[Thu Aug  2 01:19:33 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14.ximg exists
[Thu Aug  2 01:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14.csv
[Thu Aug  2 01:19:33 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Aug  2 01:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14.csv
[Thu Aug  2 01:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 01:19:34 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Aug  2 01:19:34 2012] fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Aug  2 01:19:34 2012] Fit fullrun_pn_xmm0127921001_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Aug  2 03:26:14 2012] Spatial fit model total counts = 1753.380000, observed total counts = 1589.000000
[Thu Aug  2 03:26:14 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  2 03:26:14 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.403528 pixels away
[Thu Aug  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 03:26:14 2012] Assessing source extent using major
[Thu Aug  2 03:26:14 2012] Source does appear to be extended
[Thu Aug  2 03:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 03:26:47 2012] Counts = 1371.755981, rescaling region sizes by 2.000000
[Thu Aug  2 03:26:47 2012] XMMSAS src. selection expression = ellipse(21833.040771, 35684.368439, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Aug  2 03:26:47 2012] Writing source region out to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15_src.reg
[Thu Aug  2 03:26:47 2012] Extracting stamp from image fullrun_pn_xmm0127921001_pi300-10000_cl_sm2.00.img.gz, (177, 336) - (327, 486)
[Thu Aug  2 03:26:47 2012] XMMSAS bgd. selection expression = annulus(21833.040771, 35684.368439, 4350.000000, 8700.000000, X, Y) && !ellipse(23909.371918, 35542.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14451.659744, 34729.718140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22005.998672, 32803.805023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.615460, 29680.431800, 557.236016, 452.592813, 90.000000, X, Y) && !ellipse(19031.487045, 26911.052460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30112.736359, 42989.901917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16987.703903, 41383.864075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24118.975861, 37344.635254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31102.547211, 33976.589874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.580444, 33277.518005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26400.885925, 29964.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12784.001328, 27548.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21296.651840, 27367.826355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.431946, 43767.230774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22445.548065, 37547.158234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17657.403183, 37059.965668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19638.474200, 32708.556000, 1656.432048, 1656.432048, 0.000000, X, Y) && !ellipse(20016.180328, 32715.849213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.243439, 32461.789459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.436890, 28880.985962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21653.554400, 28463.117000, 328.304009, 328.304009, 0.000000, X, Y) && !ellipse(28673.918400, 28153.074200, 406.796012, 406.796012, 0.000000, X, Y) && !ellipse(25626.278900, 26913.554200, 382.157611, 382.157611, 0.000000, X, Y) && !ellipse(29784.152588, 44547.501404, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 03:26:47 2012] Writing fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15.gif
[Thu Aug  2 03:37:45 2012] Mean detx,y = (-1495.95, -9090.86) 
[Thu Aug  2 03:37:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 03:40:11 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 03:40:11 2012] Setting source spectrum file to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Aug  2 03:40:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Aug  2 04:25:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 04:25:10 2012] rmf not generated due to insufficient counts
[Thu Aug  2 07:09:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 07:09:28 2012] Error reading totcts from fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Aug  2 07:09:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 07:09:29 2012] Using photon index=1.80, rate=0.0266, arf fullrun_pn_xmm0127921001_pi300-10000_pass1_cl_src15.arf
[Thu Aug  2 07:09:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 07:09:29 2012] Updating source flux to 1e-13
[Thu Aug  2 07:11:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting