[Fri Jul  6 02:19:37 2012] Detection parameters:
  Position = (223.4, 277.1) = 14 17 49.89 52 20 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.7 +/- 19.5
  Background counts = 129.6
  Rate = 0.008 +/- 0.002

[Fri Jul  6 02:19:37 2012] Off-axis axis estimate = 5.66'
[Fri Jul  6 02:50:10 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 02:50:10 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Fri Jul  6 02:50:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.086
[Fri Jul  6 02:50:10 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.26"
[Fri Jul  6 07:37:11 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24.ximg exists
[Fri Jul  6 07:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24.csv
[Fri Jul  6 07:37:11 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Jul  6 07:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24.csv
[Fri Jul  6 07:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 07:37:13 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Jul  6 07:37:13 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Jul  6 07:37:13 2012] Fit fullrun_mos1_xmm0127920401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Jul  6 07:37:33 2012] Source 58 is offset by -1.184412 and 3.598986 pixels which is larger than
2 X fitted extent = 1.063945 x 1.063945, not incorporating fit results
[Fri Jul  6 07:37:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 07:37:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 07:37:34 2012] Assessing source extent using major
[Fri Jul  6 07:37:34 2012] Source does appear to be extended
[Fri Jul  6 07:37:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 07:37:34 2012] Source is confused with source 56
[Fri Jul  6 07:55:58 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 07:55:58 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Fri Jul  6 07:55:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.086
[Fri Jul  6 07:55:58 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.26"
[Fri Jul  6 15:15:27 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jul  6 15:15:27 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jul  6 15:15:27 2012] Fit fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_src22 appears to have run properly
[Fri Jul  6 15:15:30 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jul  6 15:15:30 2012] fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jul  6 15:15:30 2012] Fit fullrun_mos1_xmm0127920401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jul  6 15:15:55 2012] Spatial fit model total counts = 4091.910000, observed total counts = 4060.000000
[Fri Jul  6 15:15:55 2012] Offset between fit and detection position for source 58 = 3.663250 pixels
[Fri Jul  6 15:15:55 2012] Warning, changing simple spatial fit ID from 22 to 9
[Fri Jul  6 15:15:55 2012] 3857.827000 total counts/ 3216.070000 bgd. counts: snr = 11.316389
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 3.663250 pixels
  Position = (220.2, 278.9) = 14 17 51.42 52 20 54.6
  Extent = 21.5 (19.9-23.1)", rotation angle = 0
  Source counts = 641.8 +/- 62.1
  Background counts = 3216.1
  Rate = 0.06 +/- 0.006
[Fri Jul  6 15:15:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 15:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 15:15:56 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 15:15:56 2012] Source does appear to be extended
[Fri Jul  6 15:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 15:28:35 2012] XMMSAS src. selection expression = ellipse(19109.990000, 24212.908000, 1289.112037, 1289.112037, 0.000000, X, Y)
[Fri Jul  6 15:28:35 2012] Writing source region out to fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58_src.reg
[Fri Jul  6 15:28:35 2012] Extracting stamp from image fullrun_mos1_xmm0127920401_pi300-10000_cl_sm2.00.img.gz, (146, 205) - (294, 353)
[Fri Jul  6 15:28:35 2012] XMMSAS bgd. selection expression = annulus(19109.990000, 24212.908000, 2148.520062, 4297.040124, X, Y) && !ellipse(18864.042313, 24701.112274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18159.092000, 24322.614800, 1579.696045, 1083.392031, 163.654000, X, Y) && !ellipse(19657.268158, 24957.157990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19014.846000, 25732.826000, 692.377620, 692.377620, 0.000000, X, Y) && !ellipse(18756.668000, 23174.614000, 1551.496045, 1551.496045, 0.000000, X, Y) && !ellipse(18045.387600, 25536.238000, 1566.120045, 1566.120045, 0.000000, X, Y) && !ellipse(17853.256729, 25787.728149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17342.258000, 25686.544000, 1657.544048, 1657.544048, 0.000000, X, Y) && !ellipse(20124.269226, 24486.023041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20303.560699, 27111.700989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19466.279953, 26137.050354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19846.181458, 23787.660065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16754.018600, 22334.947600, 837.280024, 837.280024, 0.000000, X, Y) && !ellipse(17333.716000, 24005.368000, 1636.792047, 1636.792047, 0.000000, X, Y) && !ellipse(24430.098000, 23577.477600, 1215.776035, 1215.776035, 0.000000, X, Y) && !ellipse(16136.176270, 22970.715515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17104.839813, 23547.645416, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 15:28:35 2012] Writing fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58.gif
[Fri Jul  6 15:35:44 2012] Mean detx,y = (-825.68, -8365.72) 
[Fri Jul  6 15:35:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 15:36:21 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 15:36:21 2012] Setting source spectrum file to fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Fri Jul  6 15:36:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Fri Jul  6 16:07:00 2012] Updating aperture counts using extracted products
[Fri Jul  6 16:07:00 2012] Error reading totcts from fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Fri Jul  6 16:07:01 2012] No arf file for this source, not re-computing flux
[Fri Jul  6 16:07:02 2012] Flag b found in src. 58 procflags, skipping spectral fitting
[Fri Jul  6 16:07:02 2012] Flag c found in src. 58 procflags, skipping spectral fitting
[Fri Jul  6 16:07:02 2012] Source 58 has no response, skipping
[Fri Jul  6 16:07:03 2012] xmm0127920401/analysis//spectral/fullrun_mos1_xmm0127920401_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete