[Sat Mar 24 10:32:55 2012] Detection parameters:
  Position = (260.4, 268.3) = 19 1 16.25 -22 0 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 492.9 +/- 30.1
  Background counts = 121.7
  Rate = 0.7 +/- 0.04

[Sat Mar 24 10:32:56 2012] Off-axis axis estimate = 3.52'
[Sat Mar 24 10:37:28 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:37:28 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Sat Mar 24 10:37:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.101
[Sat Mar 24 10:37:28 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.19"
[Sat Mar 24 11:11:14 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Mar 24 11:11:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5.csv
[Sat Mar 24 11:11:14 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Mar 24 11:11:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5.csv
[Sat Mar 24 11:11:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 11:11:15 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Mar 24 11:11:15 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Mar 24 11:11:15 2012] Fit fullrun_pn_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Mar 24 20:58:53 2012] Spatial fit model total counts = 7359.730000, observed total counts = 4770.000000
[Sat Mar 24 20:58:53 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 20:58:53 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Sat Mar 24 20:58:53 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 20:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 20:58:53 2012] Assessing source extent using major
[Sat Mar 24 20:58:53 2012] Source does appear to be extended
[Sat Mar 24 20:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:59:29 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 20:59:29 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Sat Mar 24 20:59:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.101
[Sat Mar 24 20:59:29 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.19"
[Sat Mar 24 21:27:16 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar 24 21:27:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5.csv
[Sat Mar 24 21:27:16 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar 24 21:27:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5.csv
[Sat Mar 24 21:27:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 21:27:16 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar 24 21:27:16 2012] fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar 24 21:27:16 2012] Fit fullrun_pn_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar 25 08:34:25 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.897333 pixels away
[Sun Mar 25 08:34:25 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Sun Mar 25 08:34:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 08:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 08:34:25 2012] Assessing source extent using major
[Sun Mar 25 08:34:25 2012] Source does appear to be extended
[Sun Mar 25 08:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 08:34:53 2012] XMMSAS src. selection expression = ellipse(22609.249207, 23289.287170, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 08:34:53 2012] Writing source region out to fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 25 08:34:53 2012] Extracting stamp from image fullrun_pn_xmm0127720501_pi300-10000_cl_sm2.00.img.gz, (223, 231) - (298, 306)
[Sun Mar 25 08:34:53 2012] XMMSAS bgd. selection expression = annulus(22609.249207, 23289.287170, 1087.500000, 2175.000000, X, Y) && !ellipse(24669.011800, 23036.301514, 587.629617, 587.629617, 0.000000, X, Y) && !ellipse(25261.873047, 23013.803986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23522.927094, 23130.179230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.414000, 24450.233000, 4314.576124, 4314.576124, 0.000000, X, Y) && !ellipse(23745.992035, 22146.420517, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 08:34:53 2012] Writing fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5.gif
[Sun Mar 25 08:55:07 2012] Mean detx,y = (1869.72, -1544.98) 
[Sun Mar 25 08:55:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 08:55:42 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 08:55:43 2012] Setting source spectrum file to fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 25 08:55:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar 26 23:07:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 23:07:56 2012] rmf not generated due to insufficient counts
[Tue Mar 27 03:32:42 2012] Updating aperture counts using extracted products
[Tue Mar 27 03:32:42 2012] Error reading totcts from fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Mar 27 03:32:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 03:32:42 2012] Using photon index=1.80, rate=0.677, arf fullrun_pn_xmm0127720501_pi300-10000_pass1_cl_src5.arf
[Tue Mar 27 03:32:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 03:32:42 2012] Updating source flux to 1.8e-12
[Wed Mar 28 00:02:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting