[Sat Mar 24 10:34:36 2012] Detection parameters:
  Position = (274.0, 290.0) = 19 1 12.01 -21 59 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2377.3 +/- 67.2
  Background counts = 57.3
  Rate = 0.9 +/- 0.03

[Sat Mar 24 10:34:38 2012] Off-axis axis estimate = 1.88'
[Sat Mar 24 12:58:06 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 12:58:06 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Mar 24 12:58:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Sat Mar 24 12:58:06 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.37"
[Sat Mar 24 20:58:46 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6.ximg exists
[Sat Mar 24 20:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6.csv
[Sat Mar 24 20:58:46 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Mar 24 20:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6.csv
[Sat Mar 24 20:58:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:58:47 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Mar 24 20:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Mar 24 20:58:47 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Mar 24 20:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Mar 24 20:58:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:59:15 2012] Source 6 is offset by 3.913964 and -2.004188 pixels which is larger than
2 X fitted extent = 3.881439 x 3.881439, not incorporating fit results
[Sat Mar 24 20:59:15 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Sat Mar 24 20:59:15 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 20:59:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 20:59:15 2012] Assessing source extent using major
[Sat Mar 24 20:59:15 2012] Source does appear to be extended
[Sat Mar 24 20:59:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:59:15 2012] Source is confused with source 3
[Sat Mar 24 23:14:32 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 23:14:32 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Mar 24 23:14:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Sat Mar 24 23:14:32 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.37"
[Sun Mar 25 08:34:19 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6.ximg exists
[Sun Mar 25 08:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6.csv
[Sun Mar 25 08:34:19 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Mar 25 08:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6.csv
[Sun Mar 25 08:34:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 08:34:19 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Mar 25 08:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Mar 25 08:34:19 2012] fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Mar 25 08:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Mar 25 08:34:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 08:34:40 2012] Source 6 is offset by -6.916815 and 3.193884 pixels which is larger than
2 X fitted extent = 4.948138 x 4.948138, not incorporating fit results
[Sun Mar 25 08:34:40 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Sun Mar 25 08:34:40 2012] Spatial fit model total counts = 8273.600000, observed total counts = 6734.000000
[Sun Mar 25 08:34:40 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 08:34:40 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 08:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 08:34:40 2012] Assessing source extent using major
[Sun Mar 25 08:34:40 2012] Source does appear to be extended
[Sun Mar 25 08:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 00:28:32 2012] Counts = 2377.261719, rescaling region sizes by 2.000000
[Tue Mar 27 00:28:32 2012] XMMSAS src. selection expression = ellipse(23788.238861, 25179.455627, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 27 00:28:32 2012] Writing source region out to fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 27 00:28:32 2012] Extracting stamp from image fullrun_mos2_xmm0127720501_pi300-10000_cl_sm2.00.img.gz, (199, 215) - (349, 365)
[Tue Mar 27 00:28:32 2012] XMMSAS bgd. selection expression = annulus(23788.238861, 25179.455627, 4350.000000, 8700.000000, X, Y) && !ellipse(24240.566600, 24104.148600, 3554.688102, 3554.688102, 0.000000, X, Y) && !ellipse(25170.286000, 24691.613600, 3425.544099, 3425.544099, -0.000000, X, Y) && !ellipse(24582.953095, 24427.527939, 3833.856110, 3833.856110, 0.000000, X, Y) && !ellipse(23160.752000, 24905.338000, 2393.056069, 332.188010, 18.660200, X, Y) && !ellipse(23705.253265, 24317.540192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23845.351196, 25877.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23612.653809, 23255.411652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.057465, 23761.916901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.114563, 23858.700684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26453.875000, 22921.762085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24445.054000, 28093.037759, 1151.072033, 1151.072033, 0.000000, X, Y) && !ellipse(21096.646000, 25593.534200, 1369.856039, 1369.856039, 0.000000, X, Y) && !ellipse(22151.616000, 25440.617400, 2739.712079, 2739.712079, 0.000000, X, Y)
[Tue Mar 27 00:28:32 2012] Writing fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6.gif
[Tue Mar 27 01:13:47 2012] Mean detx,y = (-348.78, -344.79) 
[Tue Mar 27 01:13:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 01:17:31 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 01:17:31 2012] Setting source spectrum file to fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 27 01:17:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 27 02:40:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 02:40:23 2012] rmf not generated due to insufficient counts
[Tue Mar 27 03:32:46 2012] Updating aperture counts using extracted products
[Tue Mar 27 03:32:46 2012] Error reading totcts from fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 27 03:32:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 03:32:47 2012] Using photon index=1.80, rate=0.904, arf fullrun_mos2_xmm0127720501_pi300-10000_pass1_cl_src6.arf
[Tue Mar 27 03:32:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 03:32:47 2012] Updating source flux to 8.6e-12
[Tue Mar 27 23:44:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting