[Sat Mar 24 10:33:46 2012] Detection parameters:
  Position = (267.2, 128.9) = 19 1 14.14 -22 11 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.9 +/- 28.8
  Background counts = 79.2
  Rate = 0.01 +/- 0.0008

[Sat Mar 24 10:33:47 2012] Off-axis axis estimate = 12.50'
[Sat Mar 24 11:11:15 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 11:11:15 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Sat Mar 24 11:11:15 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.901
[Sat Mar 24 11:11:15 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.68"
[Sat Mar 24 12:58:04 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9.ximg exists
[Sat Mar 24 12:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9.csv
[Sat Mar 24 12:58:04 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Mar 24 12:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9.csv
[Sat Mar 24 12:58:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Mar 24 12:58:05 2012] Fit fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Mar 24 20:59:03 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Sat Mar 24 20:59:03 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.508622 pixels away
[Sat Mar 24 20:59:03 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.796116 pixels away
[Sat Mar 24 20:59:03 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 20:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 20:59:03 2012] Assessing source extent using major
[Sat Mar 24 20:59:03 2012] Source does appear to be extended
[Sat Mar 24 20:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:59:03 2012] Source is confused with source 6
[Sat Mar 24 21:27:16 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 21:27:16 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Sat Mar 24 21:27:16 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.901
[Sat Mar 24 21:27:16 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.68"
[Sat Mar 24 23:14:31 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9.ximg exists
[Sat Mar 24 23:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9.csv
[Sat Mar 24 23:14:31 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Mar 24 23:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9.csv
[Sat Mar 24 23:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 23:14:32 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Mar 24 23:14:32 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Mar 24 23:14:32 2012] Fit fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Mar 25 08:34:34 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Sun Mar 25 08:34:34 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.508622 pixels away
[Sun Mar 25 08:34:34 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 08:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 08:34:34 2012] Assessing source extent using major
[Sun Mar 25 08:34:34 2012] Source does appear to be extended
[Sun Mar 25 08:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:17:33 2012] XMMSAS src. selection expression = ellipse(23197.478912, 11167.415054, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 23:17:33 2012] Writing source region out to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4_src.reg
[Mon Mar 26 23:17:33 2012] Extracting stamp from image fullrun_mos1_xmm0127720501_pi300-10000_cl_sm2.00.img.gz, (230, 91) - (305, 166)
[Mon Mar 26 23:17:34 2012] XMMSAS bgd. selection expression = annulus(23197.478912, 11167.415054, 1087.500000, 2175.000000, X, Y) && !ellipse(23410.608734, 13170.892197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23513.506926, 14076.447400, 1564.608045, 267.767930, 98.583565, X, Y) && !ellipse(23100.570343, 10566.926414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.445709, 9959.971451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23270.350560, 12014.265800, 597.402417, 597.402417, 0.000000, X, Y) && !ellipse(23365.296600, 12710.669100, 1929.744056, 393.793611, 99.423000, X, Y) && !ellipse(22939.725400, 8833.558000, 813.968023, 813.968023, 0.000000, X, Y) && !ellipse(22846.587585, 8400.489548, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 23:17:34 2012] Writing fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4.gif
[Mon Mar 26 23:20:41 2012] Mean detx,y = (13573.65, -198.12) 
[Mon Mar 26 23:20:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 23:20:53 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 23:20:53 2012] Setting source spectrum file to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 26 23:20:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 26 23:39:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 23:39:44 2012] rmf not generated due to insufficient counts
[Tue Mar 27 03:32:43 2012] Updating aperture counts using extracted products
[Tue Mar 27 03:32:43 2012] Error reading totcts from fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 27 03:32:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 03:32:45 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4.arf
[Tue Mar 27 03:32:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 03:32:45 2012] Updating source flux to 2.3e-13
[Tue Mar 27 03:32:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Mar 27 23:44:22 2012] xmm0127720501/analysis//spectral/fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete