[Sat Mar 24 10:33:46 2012] Detection parameters:
  Position = (300.0, 445.9) = 19 1 3.87 -21 48 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.4 +/- 24.6
  Background counts = 82.1
  Rate = 0.007 +/- 0.0007

[Sat Mar 24 10:33:47 2012] Off-axis axis estimate = 10.69'
[Sat Mar 24 11:11:15 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 11:11:15 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Sat Mar 24 11:11:15 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.875
[Sat Mar 24 11:11:15 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.78"
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21.ximg exists
[Sat Mar 24 12:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21.csv
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Mar 24 12:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21.csv
[Sat Mar 24 12:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Mar 24 12:58:05 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Mar 24 12:58:05 2012] Fit fullrun_mos1_xmm0127720501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Mar 24 20:59:03 2012] Source 13 is offset by -9.490620 and -1.557240 pixels which is larger than
2 X fitted extent = 1.311959 x 1.311959, not incorporating fit results
[Sat Mar 24 20:59:03 2012] Warning, spatial fit 21 centroid is now closest to src. 15
[Sat Mar 24 20:59:03 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.236521 pixels away
[Sat Mar 24 20:59:03 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 20:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 20:59:03 2012] Assessing source extent using major
[Sat Mar 24 20:59:03 2012] Source does appear to be extended
[Sat Mar 24 20:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 21:27:16 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 21:27:16 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Sat Mar 24 21:27:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.875
[Sat Mar 24 21:27:16 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.78"
[Sat Mar 24 23:14:31 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21.ximg exists
[Sat Mar 24 23:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21.csv
[Sat Mar 24 23:14:31 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Mar 24 23:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21.csv
[Sat Mar 24 23:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 23:14:32 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Mar 24 23:14:32 2012] fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Mar 24 23:14:32 2012] Fit fullrun_mos1_xmm0127720501_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Mar 25 08:34:34 2012] Source 13 is offset by -9.490620 and -1.557240 pixels which is larger than
2 X fitted extent = 1.311959 x 1.311959, not incorporating fit results
[Sun Mar 25 08:34:34 2012] Warning, spatial fit 21 centroid is now closest to src. 15
[Sun Mar 25 08:34:34 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 08:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 08:34:34 2012] Assessing source extent using major
[Sun Mar 25 08:34:34 2012] Source does appear to be extended
[Sun Mar 25 08:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 08:34:34 2012] Source is confused with source 15
[Mon Mar 26 23:17:34 2012] XMMSAS src. selection expression = ellipse(26051.938080, 38748.142151, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 23:17:34 2012] Writing source region out to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13_src.reg
[Mon Mar 26 23:17:34 2012] Extracting stamp from image fullrun_mos1_xmm0127720501_pi300-10000_cl_sm2.00.img.gz, (263, 408) - (338, 483)
[Mon Mar 26 23:17:34 2012] XMMSAS bgd. selection expression = annulus(26051.938080, 38748.142151, 1087.500000, 2175.000000, X, Y) && !ellipse(25974.543976, 37880.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.855000, 36718.496000, 937.104027, 937.104027, 0.000000, X, Y) && !ellipse(25712.208770, 35470.687290, 1669.984048, 522.609268, 96.111024, X, Y) && !ellipse(25845.140503, 36323.426025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.048800, 39660.172000, 2331.952067, 2331.952067, 0.000000, X, Y) && !ellipse(26041.957400, 40340.452000, 2012.480058, 567.110416, 89.854000, X, Y)
[Mon Mar 26 23:17:34 2012] Writing fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13.gif
[Mon Mar 26 23:27:41 2012] Mean detx,y = (-14135.50, -122.50) 
[Mon Mar 26 23:27:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 23:28:00 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 23:28:01 2012] Setting source spectrum file to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Mar 26 23:28:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Mar 27 00:12:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 00:12:52 2012] rmf not generated due to insufficient counts
[Tue Mar 27 03:32:44 2012] Updating aperture counts using extracted products
[Tue Mar 27 03:32:44 2012] Error reading totcts from fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Mar 27 03:32:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 03:32:46 2012] Using photon index=1.80, rate=0.00731, arf fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13.arf
[Tue Mar 27 03:32:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 03:32:46 2012] Updating source flux to 1.6e-13
[Tue Mar 27 03:32:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Mar 27 23:44:22 2012] xmm0127720501/analysis//spectral/fullrun_mos1_xmm0127720501_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete