[Thu May 31 20:51:45 2012] Detection parameters:
  Position = (281.3, 281.8) = 0 10 30.98 10 58 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7779.3 +/- 104.9
  Background counts = 3.2
  Rate = 1 +/- 0.01

[Thu May 31 20:51:45 2012] Off-axis axis estimate = 1.73'
[Thu May 31 20:58:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:58:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 31 20:58:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu May 31 20:58:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 31 21:18:19 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 21:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 21:18:19 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 21:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 21:18:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:18:19 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 21:18:19 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 21:18:19 2012] Fit fullrun_mos1_xmm0127110201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 21:32:15 2012] Spatial fit model total counts = 6869.010000, observed total counts = 6869.000000
[Thu May 31 21:32:15 2012] Offset between fit and detection position for source 1 = 0.125205 pixels
[Thu May 31 21:32:15 2012] 6872.260000 total counts/ 1409.250000 bgd. counts: snr = 145.525123
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.125205 pixels
  Position = (281.4, 281.7) = 0 10 30.97 10 58 30.0
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 5463.0 +/- 82.9
  Background counts = 1409.2
  Rate = 0.7 +/- 0.01
[Thu May 31 21:32:15 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:32:15 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:32:15 2012] Source does appear to be extended
[Thu May 31 21:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:34:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 21:34:01 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Thu May 31 21:34:01 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.884
[Thu May 31 21:34:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Thu May 31 21:40:31 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 21:40:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 21:40:31 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 21:40:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 21:40:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:40:31 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 21:40:31 2012] fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 21:40:31 2012] Fit fullrun_mos1_xmm0127110201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 21:46:19 2012] Spatial fit model total counts = 6868.950000, observed total counts = 6869.000000
[Thu May 31 21:46:19 2012] Offset between fit and detection position for source 1 = 0.000167 pixels
[Thu May 31 21:46:19 2012] 6872.190000 total counts/ 1405.510000 bgd. counts: snr = 145.816504
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000167 pixels
  Position = (281.4, 281.7) = 0 10 30.97 10 58 30.0
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 5466.7 +/- 82.9
  Background counts = 1405.5
  Rate = 0.7 +/- 0.01
[Thu May 31 21:46:19 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:46:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:46:19 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:46:19 2012] Source does appear to be extended
[Thu May 31 21:46:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:51:48 2012] Counts = 5466.680000, rescaling region sizes by 2.000000
[Thu May 31 21:51:48 2012] XMMSAS src. selection expression = ellipse(24430.927800, 24461.337600, 701.930420, 701.930420, 0.000000, X, Y)
[Thu May 31 21:51:48 2012] Writing source region out to fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 21:51:48 2012] Extracting stamp from image fullrun_mos1_xmm0127110201_pi300-10000_cl_sm2.00.img.gz, (241, 241) - (322, 322)
[Thu May 31 21:51:48 2012] XMMSAS bgd. selection expression = annulus(24430.927800, 24461.337600, 2339.768067, 4679.536135, X, Y)
[Thu May 31 21:51:48 2012] Writing fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1.gif
[Thu May 31 21:51:49 2012] Mean detx,y = (343.67, -249.64) 
[Thu May 31 21:51:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 21:52:06 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 21:52:06 2012] Setting source spectrum file to fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 21:52:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 22:07:29 2012] Updating aperture counts using extracted products
[Thu May 31 22:07:29 2012] Error reading totcts from fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 22:07:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 22:07:29 2012] Using photon index=1.80, rate=0.719, arf fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1.arf
[Thu May 31 22:07:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 22:07:29 2012] Updating source flux to 6.8e-12
[Thu May 31 22:07:41 2012] Reading fit data from xmm0127110201/analysis//spectral/fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 31 22:07:41 2012] Spectral fit parameter nH value = 5.08168e+20
[Thu May 31 22:07:41 2012] Spectral fit parameter PhoIndex value = 1.73026
[Thu May 31 22:07:41 2012] Failed to get F(0.3-8.0) from xmm0127110201/analysis//spectral/fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 31 22:07:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 22:07:41 2012] Using Nh = 5.1e+20, photon index=1.73, rate=0.719, arf fullrun_mos1_xmm0127110201_pi300-10000_pass1_cl_src1.arf
[Thu May 31 22:07:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 22:07:41 2012] Updating source flux to 7.4e-12