[Mon Mar 26 13:06:32 2012] Detection parameters:
  Position = (340.3, 137.1) = 5 39 25.58 -69 33 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.9 +/- 17.3
  Background counts = 17.9
  Rate = 0.004 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 12.09'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.47"
[Mon Mar 26 23:28:00 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17.ximg exists
[Mon Mar 26 23:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17.csv
[Mon Mar 26 23:28:00 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Mar 26 23:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17.csv
[Mon Mar 26 23:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Mar 26 23:28:03 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Mar 26 23:51:14 2012] Warning, spatial fit 17 centroid is now closest to src. 68
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 00:16:40 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Tue Mar 27 00:16:40 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.47"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16.csv
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16.csv
[Tue Mar 27 07:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 551.923000, observed total counts = 549.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 66 = 0.279194 pixels
[Tue Mar 27 07:37:31 2012] 553.521900 total counts/ 467.251000 bgd. counts: snr = 3.991069
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 0.279194 pixels
  Position = (340.5, 136.9) = 5 39 25.43 -69 33 6.1
  Extent = 6.9 (4.6-10.6)", rotation angle = 0
  Source counts = 86.3 +/- 23.5
  Background counts = 467.3
  Rate = 0.002 +/- 0.0006
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(29576.834800, 11858.260200, 415.740612, 415.740612, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (317, 113) - (364, 161)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(29576.834800, 11858.260200, 692.901020, 1385.802040, X, Y) && !ellipse(28446.419200, 13764.921400, 748.891222, 748.891222, 0.000000, X, Y) && !ellipse(28120.596600, 13875.584000, 1075.808031, 1075.808031, 0.000000, X, Y) && !ellipse(29145.113586, 12395.875870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(29109.784200, 12702.178000, 859.816025, 859.816025, 0.000000, X, Y) && !ellipse(28154.291168, 10838.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30811.003754, 12035.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31540.255341, 12397.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30234.296875, 13078.073700, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66.gif
[Tue Mar 27 09:06:56 2012] Mean detx,y = (-9633.80, -13342.87) 
[Tue Mar 27 09:06:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:07:14 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:07:14 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Mar 27 09:07:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Tue Mar 27 10:27:13 2012] Not generating rmf since there are only 86 counts
[Tue Mar 27 10:27:13 2012] rmf not generated due to insufficient counts
[Tue Mar 27 12:20:25 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:25 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Mar 27 12:20:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:29 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src66.arf
[Tue Mar 27 12:20:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:29 2012] Updating source flux to 8.3e-14
[Tue Mar 27 12:20:32 2012] Source 66 has fewer than 100.000000 counts, skipping spectral fitting