[Mon Mar 26 13:06:31 2012] Detection parameters:
  Position = (284.5, 149.1) = 5 40 11.94 -69 32 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.6 +/- 14.3
  Background counts = 21.0
  Rate = 0.002 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 10.87'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 11.87"
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src34.ximg exists
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon Mar 26 23:28:01 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src34 appears to have run properly
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon Mar 26 23:28:04 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 721.183000, observed total counts = 730.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 57 = 5.145843 pixels
[Mon Mar 26 23:51:14 2012] Warning, changing simple spatial fit ID from 34 to 10
[Mon Mar 26 23:51:14 2012] 698.591090 total counts/ 4.890090 bgd. counts: snr = 313.699549
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 5.145843 pixels
  Position = (279.7, 151.1) = 5 40 15.89 -69 32 4.5
  Extent = 18.0 (17.5-18.3)", rotation angle = 0
  Source counts = 693.7 +/- 26.4
  Background counts = 4.9
  Rate = 0.02 +/- 0.0007
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 8
[Tue Mar 27 00:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 17.98"
[Tue Mar 27 00:16:40 2012] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.048
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 17.98"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33.csv
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33.csv
[Tue Mar 27 07:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 731.354000, observed total counts = 730.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 57 = 2.727326 pixels
[Tue Mar 27 07:37:31 2012] Warning, changing simple spatial fit ID from 33 to 10
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 2.727326 pixels
  Position = (277.9, 149.1) = 5 40 17.42 -69 32 13.2
  Extent = 22.9 (22.1-23.3)", rotation angle = 0
  Source counts = 787.5 +/- 28.1
  Background counts = 0.0
  Rate = 0.02 +/- 0.0007
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(24126.260000, 12920.052000, 1371.426039, 1371.426039, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (199, 70) - (357, 228)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(24126.260000, 12920.052000, 2285.710066, 4571.420132, X, Y) && !ellipse(26382.316650, 11353.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.518188, 12295.841003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23146.077800, 10961.902000, 909.584026, 909.584026, 0.000000, X, Y) && !ellipse(23234.131592, 11256.505890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.007599, 10056.357643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.855103, 12736.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.748932, 10573.775726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.012000, 13696.130000, 1717.768049, 1717.768049, 0.000000, X, Y) && !ellipse(28446.419200, 13764.921400, 748.891222, 748.891222, 0.000000, X, Y) && !ellipse(24754.960000, 11739.170000, 415.532012, 415.532012, 0.000000, X, Y) && !ellipse(26242.602000, 13752.028000, 711.858420, 711.858420, 0.000000, X, Y) && !ellipse(24267.912384, 11070.274834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.411285, 11441.184418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.895599, 12639.239838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.009583, 15541.334213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.795929, 10081.902344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22962.420000, 13681.152000, 1328.984038, 1328.984038, 0.000000, X, Y) && !ellipse(28120.596600, 13875.584000, 1075.808031, 1075.808031, 0.000000, X, Y) && !ellipse(29145.113586, 12395.875870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(25176.086000, 15435.933200, 1720.472050, 1720.472050, 0.000000, X, Y) && !ellipse(23268.084106, 14140.569962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29109.784200, 12702.178000, 859.816025, 859.816025, 0.000000, X, Y) && !ellipse(28154.291168, 10838.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.878000, 13225.916000, 980.216028, 980.216028, 0.000000, X, Y) && !ellipse(22138.305800, 15062.786200, 517.437615, 517.437615, 0.000000, X, Y) && !ellipse(22714.183929, 15808.576187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28655.451843, 15021.556473, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57.gif
[Tue Mar 27 09:27:09 2012] Mean detx,y = (-4204.47, -14333.50) 
[Tue Mar 27 09:27:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:27:57 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:27:57 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Mar 27 09:27:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Mar 27 12:20:26 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:26 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Mar 27 12:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:30 2012] Using photon index=1.80, rate=0.0199, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src57.arf
[Tue Mar 27 12:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:30 2012] Updating source flux to 5e-13
[Tue Mar 27 12:20:33 2012] Flag c found in src. 57 procflags, skipping spectral fitting