[Mon Mar 26 13:06:30 2012] Detection parameters:
  Position = (336.9, 147.8) = 5 39 28.46 -69 32 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 15.0
  Background counts = 17.1
  Rate = 0.002 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 11.27'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.793
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.06"
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33.csv
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33.csv
[Mon Mar 26 23:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Mar 26 23:28:04 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Mar 26 23:51:14 2012] Source 56 is offset by 4.236130 and -0.535416 pixels which is larger than
2 X fitted extent = 1.331503 x 1.331503, not incorporating fit results
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 554.387000, observed total counts = 549.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 56 = 2.140548 pixels
[Mon Mar 26 23:51:14 2012] Warning, changing simple spatial fit ID from 33 to 27
[Mon Mar 26 23:51:14 2012] 468.691000 total counts/ 345.884000 bgd. counts: snr = 6.603252
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 2.140548 pixels
  Position = (335.2, 146.6) = 5 39 29.90 -69 32 24.0
  Extent = 10.7 (8.0-14.1)", rotation angle = 0
  Source counts = 122.8 +/- 21.6
  Background counts = 345.9
  Rate = 0.003 +/- 0.0005
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 62
[Tue Mar 27 00:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Tue Mar 27 00:16:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.991
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 10.75"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src32.ximg exists
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Mar 27 07:27:18 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src32 appears to have run properly
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Mar 27 07:37:31 2012] Source 56 is offset by -0.712917 and -1.574874 pixels which is larger than
2 X fitted extent = 1.545701 x 1.545701, not incorporating fit results
[Tue Mar 27 07:37:31 2012] Warning, spatial fit 32 centroid is now closest to src. 41
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(29109.784200, 12702.178000, 644.862019, 644.862019, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (298, 109) - (372, 184)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(29109.784200, 12702.178000, 1074.770031, 2149.540062, X, Y) && !ellipse(26382.316650, 11353.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.419200, 13764.921400, 748.891222, 748.891222, 0.000000, X, Y) && !ellipse(29576.834800, 11858.260200, 554.320816, 554.320816, 0.000000, X, Y) && !ellipse(26834.895599, 12639.239838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.596600, 13875.584000, 1075.808031, 1075.808031, 0.000000, X, Y) && !ellipse(29145.113586, 12395.875870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(29506.488000, 14187.006000, 750.444022, 750.444022, 0.000000, X, Y) && !ellipse(28154.291168, 10838.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30811.003754, 12035.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31540.255341, 12397.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30234.296875, 13078.073700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28655.451843, 15021.556473, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56.gif
[Tue Mar 27 09:26:40 2012] Mean detx,y = (-8947.05, -12737.47) 
[Tue Mar 27 09:26:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:27:03 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:27:03 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Mar 27 09:27:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Tue Mar 27 12:20:26 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:26 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Mar 27 12:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:30 2012] Using photon index=1.80, rate=0.0031, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src56.arf
[Tue Mar 27 12:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:30 2012] Updating source flux to 9.9e-14
[Tue Mar 27 12:20:33 2012] Flag b found in src. 56 procflags, skipping spectral fitting
[Tue Mar 27 12:20:33 2012] Flag c found in src. 56 procflags, skipping spectral fitting