[Mon Mar 26 13:06:30 2012] Detection parameters:
  Position = (262.1, 154.8) = 5 40 30.48 -69 31 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.5 +/- 15.7
  Background counts = 22.3
  Rate = 0.003 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 10.74'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.80"
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25.csv
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25.csv
[Mon Mar 26 23:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Mar 26 23:28:03 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Mar 26 23:51:14 2012] Warning, spatial fit 25 centroid is now closest to src. 48
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 421.033000, observed total counts = 424.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 53 = 4.562199 pixels
[Mon Mar 26 23:51:14 2012] Warning, changing simple spatial fit ID from 25 to 30
[Mon Mar 26 23:51:14 2012] 451.210000 total counts/ 163.760000 bgd. counts: snr = 22.462516
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 4.562199 pixels
  Position = (264.9, 158.4) = 5 40 28.15 -69 31 32.5
  Extent = 16.8 (12.9-22.9)", rotation angle = 0
  Source counts = 287.4 +/- 21.2
  Background counts = 163.8
  Rate = 0.007 +/- 0.0005
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 48
[Mon Mar 26 23:51:14 2012] Source is confused with source 61
[Tue Mar 27 00:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 16.79"
[Tue Mar 27 00:16:40 2012] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.947
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 16.79"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24.csv
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24.csv
[Tue Mar 27 07:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Mar 27 07:37:31 2012] Warning, spatial fit 24 centroid is now closest to src. 61
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 426.348000, observed total counts = 424.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 53 = 0.733141 pixels
[Tue Mar 27 07:37:31 2012] Warning, changing simple spatial fit ID from 24 to 29
[Tue Mar 27 07:37:31 2012] 469.500000 total counts/ 203.376000 bgd. counts: snr = 18.660969
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.733141 pixels
  Position = (264.5, 157.8) = 5 40 28.50 -69 31 35.1
  Extent = 16.6 (13.5-22.3)", rotation angle = 0
  Source counts = 266.1 +/- 21.7
  Background counts = 203.4
  Rate = 0.007 +/- 0.0005
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(22962.420000, 13681.152000, 996.738029, 996.738029, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (207, 101) - (322, 215)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(22962.420000, 13681.152000, 1661.230048, 3322.460096, X, Y) && !ellipse(26382.316650, 11353.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.518188, 12295.841003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23146.077800, 10961.902000, 909.584026, 909.584026, 0.000000, X, Y) && !ellipse(23234.131592, 11256.505890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24697.007599, 10056.357643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.855103, 12736.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.748932, 10573.775726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.012000, 13696.130000, 1717.768049, 1717.768049, 0.000000, X, Y) && !ellipse(24754.960000, 11739.170000, 415.532012, 415.532012, 0.000000, X, Y) && !ellipse(26242.602000, 13752.028000, 711.858420, 711.858420, 0.000000, X, Y) && !ellipse(24267.912384, 11070.274834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.411285, 11441.184418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.895599, 12639.239838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.009583, 15541.334213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.795929, 10081.902344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(25176.086000, 15435.933200, 1720.472050, 1720.472050, 0.000000, X, Y) && !ellipse(23268.084106, 14140.569962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.260000, 12920.052000, 1828.568053, 1828.568053, 0.000000, X, Y) && !ellipse(22721.878000, 13225.916000, 980.216028, 980.216028, 0.000000, X, Y) && !ellipse(22138.305800, 15062.786200, 517.437615, 517.437615, 0.000000, X, Y) && !ellipse(22714.183929, 15808.576187, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53.gif
[Tue Mar 27 09:21:00 2012] Mean detx,y = (-2796.82, -13929.72) 
[Tue Mar 27 09:21:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:21:32 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:21:32 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Mar 27 09:21:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Mar 27 12:20:26 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:26 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Mar 27 12:20:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:29 2012] Using photon index=1.80, rate=0.00672, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src53.arf
[Tue Mar 27 12:20:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:29 2012] Updating source flux to 1.7e-13
[Tue Mar 27 12:20:32 2012] Flag c found in src. 53 procflags, skipping spectral fitting