[Mon Mar 26 13:06:30 2012] Detection parameters:
  Position = (302.2, 158.2) = 5 39 57.23 -69 31 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.0 +/- 17.1
  Background counts = 22.1
  Rate = 0.004 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 10.17'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.909
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.51"
[Mon Mar 26 23:28:00 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14.ximg exists
[Mon Mar 26 23:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14.csv
[Mon Mar 26 23:28:00 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Mar 26 23:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14.csv
[Mon Mar 26 23:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Mar 26 23:28:03 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Mar 26 23:28:03 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 405.610000, observed total counts = 408.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 49 = 2.490487 pixels
[Mon Mar 26 23:51:14 2012] 387.754550 total counts/ 3.542550 bgd. counts: snr = 204.132865
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.490487 pixels
  Position = (304.6, 157.4) = 5 39 55.28 -69 31 37.0
  Extent = 20.5 (20.5-20.5)", rotation angle = 0
  Source counts = 384.2 +/- 19.7
  Background counts = 3.5
  Rate = 0.01 +/- 0.0005
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 59
[Mon Mar 26 23:51:14 2012] Source is confused with source 47
[Tue Mar 27 00:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 20.46"
[Tue Mar 27 00:16:40 2012] source mask rpix=4.7, npix_max = 108, mask sum = 119, frac = 1.099
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 20.46"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14.csv
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Mar 27 07:27:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14.csv
[Tue Mar 27 07:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Mar 27 07:37:31 2012] Warning, spatial fit 14 centroid is now closest to src. 47
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 1362.370000, observed total counts = 1359.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 49 = 2.664056 pixels
[Tue Mar 27 07:37:31 2012] Warning, changing simple spatial fit ID from 14 to 27
[Tue Mar 27 07:37:31 2012] 1193.731000 total counts/ 1037.440000 bgd. counts: snr = 4.852354
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.664056 pixels
  Position = (302.2, 158.6) = 5 39 57.24 -69 31 31.7
  Extent = 8.9 (7.5-10.6)", rotation angle = 0
  Source counts = 156.3 +/- 34.6
  Background counts = 1037.4
  Rate = 0.004 +/- 0.0009
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(26242.602000, 13752.028000, 533.893815, 533.893815, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (272, 128) - (333, 189)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(26242.602000, 13752.028000, 889.823026, 1779.646051, X, Y) && !ellipse(26382.316650, 11353.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.518188, 12295.841003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.855103, 12736.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.012000, 13696.130000, 1717.768049, 1717.768049, 0.000000, X, Y) && !ellipse(28446.419200, 13764.921400, 748.891222, 748.891222, 0.000000, X, Y) && !ellipse(24754.960000, 11739.170000, 415.532012, 415.532012, 0.000000, X, Y) && !ellipse(23597.411285, 11441.184418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.895599, 12639.239838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.009583, 15541.334213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.596600, 13875.584000, 1075.808031, 1075.808031, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(25176.086000, 15435.933200, 1720.472050, 1720.472050, 0.000000, X, Y) && !ellipse(24126.260000, 12920.052000, 1828.568053, 1828.568053, 0.000000, X, Y) && !ellipse(28655.451843, 15021.556473, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49.gif
[Tue Mar 27 09:05:54 2012] Mean detx,y = (-5851.47, -12690.49) 
[Tue Mar 27 09:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:06:13 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:06:13 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Mar 27 09:06:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Tue Mar 27 12:20:25 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:25 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Mar 27 12:20:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:28 2012] Using photon index=1.80, rate=0.00395, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src49.arf
[Tue Mar 27 12:20:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:28 2012] Updating source flux to 1.1e-13
[Tue Mar 27 12:20:32 2012] Flag c found in src. 49 procflags, skipping spectral fitting