[Mon Mar 26 13:06:30 2012] Detection parameters:
  Position = (364.9, 162.0) = 5 39 5.25 -69 31 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 11.4
  Background counts = 21.7
  Rate = 0.001 +/- 0.0003

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 11.00'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 11.93"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.7, npix_max = 42, mask sum = 35, frac = 0.832
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 11.93"
[Mon Mar 26 23:28:02 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58.ximg exists
[Mon Mar 26 23:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58.csv
[Mon Mar 26 23:28:02 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58_1.ximg exists
[Mon Mar 26 23:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58.csv
[Mon Mar 26 23:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Mon Mar 26 23:28:05 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 459.837000, observed total counts = 458.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 46 = 1.326341 pixels
[Mon Mar 26 23:51:14 2012] Warning, changing simple spatial fit ID from 58 to 36
[Mon Mar 26 23:51:14 2012] 451.738500 total counts/ 440.448000 bgd. counts: snr = 0.537980
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.326341 pixels
  Position = (365.5, 163.2) = 5 39 4.76 -69 31 11.2
  Extent = 4.0 (3.0-12.6)", rotation angle = 0
  Source counts = 11.3 +/- 21.3
  Background counts = 440.4
  Rate = 0.0003 +/- 0.0005
  Deleting source due to low Poisson probability