[Mon Mar 26 13:06:29 2012] Detection parameters:
  Position = (256.3, 174.9) = 5 40 35.29 -69 30 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 11.2
  Background counts = 28.0
  Rate = 0.001 +/- 0.0003

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 9.46'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.16"
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53.csv
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53.csv
[Mon Mar 26 23:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Mar 26 23:28:05 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Mar 26 23:51:14 2012] Warning, spatial fit 53 centroid is now closest to src. 35
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 00:16:40 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Tue Mar 27 00:16:40 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 11.16"
[Tue Mar 27 07:27:19 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50.ximg exists
[Tue Mar 27 07:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50.csv
[Tue Mar 27 07:27:19 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue Mar 27 07:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50.csv
[Tue Mar 27 07:27:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:21 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue Mar 27 07:27:21 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue Mar 27 07:27:21 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 501.938000, observed total counts = 503.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 40 = 1.745645 pixels
[Tue Mar 27 07:37:31 2012] 482.478000 total counts/ 430.202000 bgd. counts: snr = 2.520381
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.745645 pixels
  Position = (255.0, 173.7) = 5 40 36.32 -69 30 25.9
  Extent = 6.5 (4.5-8.5)", rotation angle = 0
  Source counts = 52.3 +/- 22.0
  Background counts = 430.2
  Rate = 0.001 +/- 0.0006
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:23 2012] XMMSAS src. selection expression = ellipse(22138.305800, 15062.786200, 388.078211, 388.078211, 0.000000, X, Y)
[Tue Mar 27 08:55:23 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40_src.reg
[Tue Mar 27 08:55:23 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (233, 151) - (277, 196)
[Tue Mar 27 08:55:23 2012] XMMSAS bgd. selection expression = annulus(22138.305800, 15062.786200, 646.797019, 1293.594037, X, Y) && !ellipse(24954.012000, 13696.130000, 1717.768049, 1717.768049, 0.000000, X, Y) && !ellipse(22962.420000, 13681.152000, 1328.984038, 1328.984038, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(23268.084106, 14140.569962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.260000, 12920.052000, 1828.568053, 1828.568053, 0.000000, X, Y) && !ellipse(22721.878000, 13225.916000, 980.216028, 980.216028, 0.000000, X, Y) && !ellipse(22714.183929, 15808.576187, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:23 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40.gif
[Tue Mar 27 09:34:09 2012] Mean detx,y = (-1557.87, -12846.17) 
[Tue Mar 27 09:34:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:34:29 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:34:29 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 27 09:34:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Mar 27 11:47:24 2012] Not generating rmf since there are only 52 counts
[Tue Mar 27 11:47:24 2012] rmf not generated due to insufficient counts
[Tue Mar 27 12:20:27 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:27 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 27 12:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:30 2012] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src40.arf
[Tue Mar 27 12:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:31 2012] Updating source flux to 3.9e-14
[Tue Mar 27 12:20:33 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting