[Mon Mar 26 13:06:29 2012] Detection parameters:
  Position = (286.7, 176.1) = 5 40 10.05 -69 30 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.3 +/- 15.2
  Background counts = 32.0
  Rate = 0.003 +/- 0.0004

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 8.91'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.89"
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29.csv
[Mon Mar 26 23:28:01 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Mar 26 23:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29.csv
[Mon Mar 26 23:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Mar 26 23:28:04 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Mar 26 23:28:04 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Mar 26 23:51:14 2012] Spatial fit model total counts = 472.456000, observed total counts = 473.000000
[Mon Mar 26 23:51:14 2012] Offset between fit and detection position for source 37 = 3.738678 pixels
[Mon Mar 26 23:51:14 2012] Warning, changing simple spatial fit ID from 29 to 22
[Mon Mar 26 23:51:14 2012] 494.055500 total counts/ 39.684500 bgd. counts: snr = 72.127379
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 3.738678 pixels
  Position = (289.9, 178.0) = 5 40 7.40 -69 30 7.5
  Extent = 21.5 (21.5-43.0)", rotation angle = 0
  Source counts = 454.4 +/- 22.2
  Background counts = 39.7
  Rate = 0.01 +/- 0.0006
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 36
[Tue Mar 27 00:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 21.51"
[Tue Mar 27 00:16:40 2012] source mask rpix=4.9, npix_max = 118, mask sum = 110, frac = 0.928
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 21.51"
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Mar 27 07:27:18 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Mar 27 07:27:18 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Mar 27 07:27:20 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Mar 27 07:27:20 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Mar 27 07:37:31 2012] Source 37 is offset by 2.562690 and 1.230083 pixels which is larger than
2 X fitted extent = 1.236805 x 1.236805, not incorporating fit results
[Tue Mar 27 07:37:31 2012] Source 37 is offset by 6.153862 and 2.685462 pixels which is larger than
2 X fitted extent = 4.947219 x 4.947219, not incorporating fit results
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:22 2012] XMMSAS src. selection expression = ellipse(25176.086000, 15435.933200, 1290.354037, 1290.354037, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37_src.reg
[Tue Mar 27 08:55:22 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (216, 104) - (364, 252)
[Tue Mar 27 08:55:22 2012] XMMSAS bgd. selection expression = annulus(25176.086000, 15435.933200, 2150.590062, 4301.180124, X, Y) && !ellipse(26382.316650, 11353.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.518188, 12295.841003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23146.077800, 10961.902000, 909.584026, 909.584026, 0.000000, X, Y) && !ellipse(23234.131592, 11256.505890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.855103, 12736.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.748932, 10573.775726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.012000, 13696.130000, 1717.768049, 1717.768049, 0.000000, X, Y) && !ellipse(28446.419200, 13764.921400, 748.891222, 748.891222, 0.000000, X, Y) && !ellipse(24754.960000, 11739.170000, 415.532012, 415.532012, 0.000000, X, Y) && !ellipse(26242.602000, 13752.028000, 711.858420, 711.858420, 0.000000, X, Y) && !ellipse(29576.834800, 11858.260200, 554.320816, 554.320816, 0.000000, X, Y) && !ellipse(24267.912384, 11070.274834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.411285, 11441.184418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.895599, 12639.239838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.009583, 15541.334213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22962.420000, 13681.152000, 1328.984038, 1328.984038, 0.000000, X, Y) && !ellipse(28120.596600, 13875.584000, 1075.808031, 1075.808031, 0.000000, X, Y) && !ellipse(29145.113586, 12395.875870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.838000, 14239.932000, 3246.752093, 3246.752093, 0.000000, X, Y) && !ellipse(23268.084106, 14140.569962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29506.488000, 14187.006000, 750.444022, 750.444022, 0.000000, X, Y) && !ellipse(29109.784200, 12702.178000, 859.816025, 859.816025, 0.000000, X, Y) && !ellipse(24126.260000, 12920.052000, 1828.568053, 1828.568053, 0.000000, X, Y) && !ellipse(28154.291168, 10838.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.878000, 13225.916000, 980.216028, 980.216028, 0.000000, X, Y) && !ellipse(22138.305800, 15062.786200, 517.437615, 517.437615, 0.000000, X, Y) && !ellipse(30234.296875, 13078.073700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22714.183929, 15808.576187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28655.451843, 15021.556473, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:22 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37.gif
[Tue Mar 27 09:25:37 2012] Mean detx,y = (-4236.81, -11503.11) 
[Tue Mar 27 09:25:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:25:54 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:25:54 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Mar 27 09:25:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Mar 27 12:20:26 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:26 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Mar 27 12:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:30 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src37.arf
[Tue Mar 27 12:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:30 2012] Updating source flux to 2.3e-13
[Tue Mar 27 12:20:33 2012] Flag b found in src. 37 procflags, skipping spectral fitting
[Tue Mar 27 12:20:33 2012] Flag c found in src. 37 procflags, skipping spectral fitting