[Mon Mar 26 13:06:27 2012] Detection parameters:
  Position = (327.8, 468.8) = 5 39 36.39 -69 9 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 11.8
  Background counts = 30.9
  Rate = 0.001 +/- 0.0003

[Mon Mar 26 13:06:32 2012] Off-axis axis estimate = 12.53'
[Mon Mar 26 14:54:08 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:54:08 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Mon Mar 26 14:54:08 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.984
[Mon Mar 26 14:54:08 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 12.70"
[Mon Mar 26 23:28:02 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63.ximg exists
[Mon Mar 26 23:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63.csv
[Mon Mar 26 23:28:02 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon Mar 26 23:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63.csv
[Mon Mar 26 23:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon Mar 26 23:28:05 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Mar 26 23:28:05 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Mon Mar 26 23:51:14 2012] Source 17 is offset by -5.353620 and -0.155191 pixels which is larger than
2 X fitted extent = 1.654317 x 1.654317, not incorporating fit results
[Mon Mar 26 23:51:14 2012] Source 17 is offset by 2.046472 and 5.591406 pixels which is larger than
2 X fitted extent = 1.475048 x 1.475048, not incorporating fit results
[Mon Mar 26 23:51:14 2012] Warning, spatial fit 63 centroid is now closest to src. 16
[Mon Mar 26 23:51:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 23:51:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 23:51:14 2012] Assessing source extent using major
[Mon Mar 26 23:51:14 2012] Source does appear to be extended
[Mon Mar 26 23:51:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:51:14 2012] Source is confused with source 16
[Tue Mar 27 00:16:40 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 00:16:40 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Tue Mar 27 00:16:40 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.984
[Tue Mar 27 00:16:40 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 12.70"
[Tue Mar 27 07:27:19 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58.ximg exists
[Tue Mar 27 07:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58.csv
[Tue Mar 27 07:27:19 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue Mar 27 07:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58.csv
[Tue Mar 27 07:27:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:27:21 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue Mar 27 07:27:21 2012] fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue Mar 27 07:27:21 2012] Fit fullrun_mos1_xmm0125120201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Tue Mar 27 07:37:31 2012] Spatial fit model total counts = 1701.520000, observed total counts = 1690.000000
[Tue Mar 27 07:37:31 2012] Offset between fit and detection position for source 17 = 2.465479 pixels
[Tue Mar 27 07:37:31 2012] Warning, changing simple spatial fit ID from 58 to 45
[Tue Mar 27 07:37:31 2012] 1643.964000 total counts/ 853.703000 bgd. counts: snr = 27.046878
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.465479 pixels
  Position = (330.1, 467.9) = 5 39 34.53 -69 9 6.3
  Extent = 49.9 (48.2-50.8)", rotation angle = 0
  Source counts = 790.3 +/- 40.5
  Background counts = 853.7
  Rate = 0.02 +/- 0.001
[Tue Mar 27 07:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:37:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:37:32 2012] Source does appear to be extended
[Tue Mar 27 07:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:55:23 2012] XMMSAS src. selection expression = ellipse(28673.640000, 40657.430000, 2996.052086, 2996.052086, 0.000000, X, Y)
[Tue Mar 27 08:55:23 2012] Writing source region out to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17_src.reg
[Tue Mar 27 08:55:23 2012] Extracting stamp from image fullrun_mos1_xmm0125120201_pi300-10000_cl_sm2.00.img.gz, (158, 296) - (502, 595)
[Tue Mar 27 08:55:23 2012] XMMSAS bgd. selection expression = annulus(28673.640000, 40657.430000, 4993.420144, 9986.840287, X, Y) && !ellipse(34117.090600, 39427.956400, 862.656025, 862.656025, 0.000000, X, Y) && !ellipse(33750.252000, 39679.360000, 2159.640062, 2159.640062, 0.000000, X, Y) && !ellipse(33185.831879, 40313.579285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33470.394000, 40301.404000, 4108.736118, 4108.736118, 0.000000, X, Y) && !ellipse(34701.383667, 39016.565613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35929.614600, 36550.114000, 1909.296055, 1909.296055, 0.000000, X, Y) && !ellipse(32068.574000, 39287.638000, 2054.368059, 2054.368059, 0.000000, X, Y) && !ellipse(38747.945679, 32279.840302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.302000, 35735.018400, 931.360027, 931.360027, 0.000000, X, Y) && !ellipse(34287.602661, 40684.566528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32663.415039, 39743.815308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35860.284600, 36395.044000, 3818.592110, 2453.056071, 69.114000, X, Y) && !ellipse(26739.140000, 41726.812000, 1488.984043, 1488.984043, 0.000000, X, Y) && !ellipse(35372.514008, 35741.618835, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:55:23 2012] Writing fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17.gif
[Tue Mar 27 09:40:02 2012] Mean detx,y = (1006.00, 13508.63) 
[Tue Mar 27 09:40:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 09:42:22 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 09:42:22 2012] Setting source spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 27 09:42:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Mar 27 12:20:28 2012] Updating aperture counts using extracted products
[Tue Mar 27 12:20:28 2012] Error reading totcts from fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 27 12:20:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 12:20:31 2012] Using photon index=1.80, rate=0.02, arf fullrun_mos1_xmm0125120201_pi300-10000_pass1_cl_src17.arf
[Tue Mar 27 12:20:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 12:20:31 2012] Updating source flux to 3.2e-13
[Tue Mar 27 12:20:33 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Tue Mar 27 12:20:33 2012] Flag c found in src. 17 procflags, skipping spectral fitting