[Fri Jul 13 20:53:14 2012] Detection parameters:
  Position = (340.2, 167.1) = 5 39 25.77 -69 30 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.0 +/- 15.9
  Background counts = 24.3
  Rate = 0.004 +/- 0.0005

[Fri Jul 13 20:53:14 2012] Off-axis axis estimate = 9.99'
[Fri Jul 13 20:53:59 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:53:59 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Fri Jul 13 20:53:59 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.921
[Fri Jul 13 20:53:59 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 11.42"
[Sat Jul 14 04:32:24 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75.ximg exists
[Sat Jul 14 04:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75.csv
[Sat Jul 14 04:32:24 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75_1.ximg exists
[Sat Jul 14 04:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75.csv
[Sat Jul 14 04:32:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 04:32:26 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sat Jul 14 04:32:27 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sat Jul 14 04:32:27 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Sat Jul 14 04:32:48 2012] Spatial fit model total counts = 489.031000, observed total counts = 487.000000
[Sat Jul 14 04:32:48 2012] Offset between fit and detection position for source 75 = 6.981338 pixels
[Sat Jul 14 04:32:48 2012] 463.709300 total counts/ 47.365300 bgd. counts: snr = 60.495374
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 6.981338 pixels
  Position = (345.9, 163.1) = 5 39 21.02 -69 31 12.1
  Extent = 22.8 (22.8-45.7)", rotation angle = 0
  Source counts = 416.3 +/- 21.5
  Background counts = 47.4
  Rate = 0.01 +/- 0.0007
[Sat Jul 14 04:32:48 2012] Source 75 is offset by -4.466759 and -4.267678 pixels which is larger than
2 X fitted extent = 1.356579 x 1.356579, not incorporating fit results
[Sat Jul 14 04:32:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 04:32:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 04:32:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 04:32:48 2012] Source does appear to be extended
[Sat Jul 14 04:32:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 04:32:48 2012] Source is confused with source 70
[Sat Jul 14 04:32:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:32:55 2012] Initial guess for spatial extent in simple fitting = 22.85"
[Sat Jul 14 04:32:55 2012] source mask rpix=5.3, npix_max = 132, mask sum = 144, frac = 1.088
[Sat Jul 14 04:32:55 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 22.85"
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48.csv
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48.csv
[Sat Jul 14 11:34:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:35:01 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jul 14 11:35:01 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jul 14 11:35:01 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sat Jul 14 11:35:26 2012] Warning, spatial fit 48 centroid is now closest to src. 84
[Sat Jul 14 11:35:26 2012] Source 75 is offset by 4.366874 and -4.803080 pixels which is larger than
2 X fitted extent = 1.369182 x 1.369182, not incorporating fit results
[Sat Jul 14 11:35:27 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:35:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:35:27 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:35:27 2012] Source does appear to be extended
[Sat Jul 14 11:35:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:35:40 2012] XMMSAS src. selection expression = ellipse(30043.570000, 14139.890000, 1370.934039, 1370.934039, 0.000000, X, Y)
[Sat Jul 14 11:35:40 2012] Writing source region out to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75_src.reg
[Sat Jul 14 11:35:40 2012] Extracting stamp from image fullrun_mos2_xmm0125120101_pi300-10000_cl_sm2.00.img.gz, (267, 84) - (425, 242)
[Sat Jul 14 11:35:40 2012] XMMSAS bgd. selection expression = annulus(30043.570000, 14139.890000, 2284.890066, 4569.780131, X, Y) && !ellipse(26205.420013, 11894.839981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.774872, 11516.471756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.983800, 16476.008000, 1698.192049, 1698.192049, 0.000000, X, Y) && !ellipse(25582.882019, 16998.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.681000, 16361.154000, 1623.472047, 202.933606, 348.537900, X, Y) && !ellipse(26132.464000, 16435.452000, 1618.448047, 204.555206, -0.000000, X, Y) && !ellipse(26651.864000, 15738.978000, 557.388816, 557.388816, 0.000000, X, Y) && !ellipse(25381.771515, 15539.203552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.790314, 15179.161667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.368000, 15030.398000, 1744.328050, 1744.328050, 0.000000, X, Y) && !ellipse(29099.781616, 14827.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25494.243866, 14232.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.115417, 14404.278091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26492.675598, 14020.384750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.819794, 13771.653641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29449.839800, 13554.395000, 399.218411, 399.218411, 0.000000, X, Y) && !ellipse(30588.583984, 13613.258575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.248199, 12984.842346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.055664, 12826.102127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31272.498291, 12220.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30897.448853, 11957.269012, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 11:35:40 2012] Writing fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75.gif
[Sat Jul 14 12:08:30 2012] Mean detx,y = (10936.26, -9541.26) 
[Sat Jul 14 12:08:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 12:09:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 12:09:20 2012] Setting source spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jul 14 12:09:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat Jul 14 13:42:31 2012] Updating aperture counts using extracted products
[Sat Jul 14 13:42:32 2012] Error reading totcts from fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jul 14 13:42:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 13:42:35 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src75.arf
[Sat Jul 14 13:42:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 13:42:35 2012] Updating source flux to 3e-13
[Sat Jul 14 13:42:38 2012] Flag b found in src. 75 procflags, skipping spectral fitting
[Sat Jul 14 13:42:38 2012] Flag c found in src. 75 procflags, skipping spectral fitting