[Fri Jul 13 20:53:14 2012] Detection parameters:
  Position = (306.7, 183.3) = 5 39 53.54 -69 29 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 12.9
  Background counts = 29.2
  Rate = 0.002 +/- 0.0004

[Fri Jul 13 20:53:14 2012] Off-axis axis estimate = 8.37'
[Fri Jul 13 20:53:59 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:53:59 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Fri Jul 13 20:53:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Fri Jul 13 20:53:59 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.61"
[Sat Jul 14 04:32:23 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61.ximg exists
[Sat Jul 14 04:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61.csv
[Sat Jul 14 04:32:24 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Jul 14 04:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61.csv
[Sat Jul 14 04:32:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 04:32:26 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Jul 14 04:32:26 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Jul 14 04:32:26 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Jul 14 04:32:48 2012] Spatial fit model total counts = 560.640000, observed total counts = 560.000000
[Sat Jul 14 04:32:48 2012] Offset between fit and detection position for source 61 = 1.815855 pixels
[Sat Jul 14 04:32:48 2012] Warning, changing simple spatial fit ID from 61 to 56
[Sat Jul 14 04:32:48 2012] 570.706300 total counts/ 496.889000 bgd. counts: snr = 3.311528
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.815855 pixels
  Position = (306.9, 181.5) = 5 39 53.34 -69 29 52.4
  Extent = 7.0 (6.0-8.2)", rotation angle = 0
  Source counts = 73.8 +/- 23.9
  Background counts = 496.9
  Rate = 0.002 +/- 0.0008
[Sat Jul 14 04:32:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 04:32:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 04:32:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 04:32:48 2012] Source does appear to be extended
[Sat Jul 14 04:32:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 04:32:48 2012] Source is confused with source 50
[Sat Jul 14 04:32:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:32:55 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Sat Jul 14 04:32:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.132
[Sat Jul 14 04:32:55 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 6.97"
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41.csv
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41.csv
[Sat Jul 14 11:34:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:35:00 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jul 14 11:35:00 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jul 14 11:35:00 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Jul 14 11:35:26 2012] Warning, spatial fit 41 centroid is now closest to src. 66
[Sat Jul 14 11:35:27 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:35:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:35:27 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:35:27 2012] Source does appear to be extended
[Sat Jul 14 11:35:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:35:39 2012] XMMSAS src. selection expression = ellipse(26651.864000, 15738.978000, 418.041612, 418.041612, 0.000000, X, Y)
[Sat Jul 14 11:35:39 2012] Writing source region out to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61_src.reg
[Sat Jul 14 11:35:39 2012] Extracting stamp from image fullrun_mos2_xmm0125120101_pi300-10000_cl_sm2.00.img.gz, (283, 157) - (331, 205)
[Sat Jul 14 11:35:39 2012] XMMSAS bgd. selection expression = annulus(26651.864000, 15738.978000, 696.736020, 1393.472040, X, Y) && !ellipse(26484.983800, 16476.008000, 1698.192049, 1698.192049, 0.000000, X, Y) && !ellipse(25582.882019, 16998.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.681000, 16361.154000, 1623.472047, 202.933606, 348.537900, X, Y) && !ellipse(26132.464000, 16435.452000, 1618.448047, 204.555206, -0.000000, X, Y) && !ellipse(25381.771515, 15539.203552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.790314, 15179.161667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.368000, 15030.398000, 1744.328050, 1744.328050, 0.000000, X, Y) && !ellipse(25494.243866, 14232.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.750580, 14317.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.115417, 14404.278091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26492.675598, 14020.384750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.819794, 13771.653641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24580.669525, 13594.624252, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 11:35:39 2012] Writing fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61.gif
[Sat Jul 14 12:05:03 2012] Mean detx,y = (10426.72, -5759.17) 
[Sat Jul 14 12:05:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 12:05:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 12:05:20 2012] Setting source spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jul 14 12:05:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Jul 14 13:22:01 2012] Not generating rmf since there are only 73 counts
[Sat Jul 14 13:22:01 2012] rmf not generated due to insufficient counts
[Sat Jul 14 13:42:31 2012] Updating aperture counts using extracted products
[Sat Jul 14 13:42:31 2012] Error reading totcts from fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jul 14 13:42:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 13:42:34 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src61.arf
[Sat Jul 14 13:42:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 13:42:34 2012] Updating source flux to 5.4e-14
[Sat Jul 14 13:42:38 2012] Flag c found in src. 61 procflags, skipping spectral fitting
[Sat Jul 14 13:42:38 2012] Source 61 has fewer than 100.000000 counts, skipping spectral fitting