[Fri Jul 13 20:53:14 2012] Detection parameters:
  Position = (274.8, 187.9) = 5 40 19.91 -69 29 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.8 +/- 13.7
  Background counts = 25.6
  Rate = 0.003 +/- 0.0004

[Fri Jul 13 20:53:14 2012] Off-axis axis estimate = 8.19'
[Fri Jul 13 20:53:59 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:53:59 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Fri Jul 13 20:53:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Fri Jul 13 20:53:59 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.53"
[Sat Jul 14 04:32:23 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59.ximg exists
[Sat Jul 14 04:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59.csv
[Sat Jul 14 04:32:23 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Jul 14 04:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59.csv
[Sat Jul 14 04:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 04:32:26 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Jul 14 04:32:26 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Jul 14 04:32:26 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sat Jul 14 04:32:48 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 12.740111 pixels away
[Sat Jul 14 04:32:48 2012] Spatial fit model total counts = 443.032000, observed total counts = 445.000000
[Sat Jul 14 04:32:48 2012] Offset between fit and detection position for source 59 = 0.805856 pixels
[Sat Jul 14 04:32:48 2012] Warning, changing simple spatial fit ID from 59 to 63
[Sat Jul 14 04:32:48 2012] 400.343100 total counts/ 327.367000 bgd. counts: snr = 4.033325
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.805856 pixels
  Position = (274.0, 187.7) = 5 40 20.54 -69 29 25.4
  Extent = 8.7 (4.9-13.2)", rotation angle = 0
  Source counts = 73.0 +/- 20.0
  Background counts = 327.4
  Rate = 0.002 +/- 0.0006
[Sat Jul 14 04:32:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 04:32:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 04:32:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 04:32:48 2012] Source does appear to be extended
[Sat Jul 14 04:32:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 04:32:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 04:32:55 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sat Jul 14 04:32:55 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.002
[Sat Jul 14 04:32:55 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 8.69"
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39.csv
[Sat Jul 14 11:34:57 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Jul 14 11:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39.csv
[Sat Jul 14 11:34:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:35:00 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Jul 14 11:35:00 2012] fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Jul 14 11:35:00 2012] Fit fullrun_mos2_xmm0125120101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Jul 14 11:35:26 2012] Warning, spatial fit 39 centroid is now closest to src. 60
[Sat Jul 14 11:35:27 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:35:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:35:27 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 11:35:27 2012] Source does appear to be extended
[Sat Jul 14 11:35:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:35:39 2012] XMMSAS src. selection expression = ellipse(23793.078000, 16277.534000, 521.297415, 521.297415, 0.000000, X, Y)
[Sat Jul 14 11:35:39 2012] Writing source region out to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59_src.reg
[Sat Jul 14 11:35:39 2012] Extracting stamp from image fullrun_mos2_xmm0125120101_pi300-10000_cl_sm2.00.img.gz, (244, 158) - (304, 218)
[Sat Jul 14 11:35:39 2012] XMMSAS bgd. selection expression = annulus(23793.078000, 16277.534000, 868.829025, 1737.658050, X, Y) && !ellipse(26484.983800, 16476.008000, 1698.192049, 1698.192049, 0.000000, X, Y) && !ellipse(25582.882019, 16998.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.681000, 16361.154000, 1623.472047, 202.933606, 348.537900, X, Y) && !ellipse(26132.464000, 16435.452000, 1618.448047, 204.555206, -0.000000, X, Y) && !ellipse(25381.771515, 15539.203552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.790314, 15179.161667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.368000, 15030.398000, 1744.328050, 1744.328050, 0.000000, X, Y) && !ellipse(25494.243866, 14232.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.750580, 14317.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22769.051600, 14337.987600, 489.442414, 489.442414, 0.000000, X, Y) && !ellipse(25853.819794, 13771.653641, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 11:35:39 2012] Writing fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59.gif
[Sat Jul 14 12:04:39 2012] Mean detx,y = (10961.25, -2981.83) 
[Sat Jul 14 12:04:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 12:04:55 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 12:04:55 2012] Setting source spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat Jul 14 12:04:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Sat Jul 14 13:21:53 2012] Not generating rmf since there are only 72 counts
[Sat Jul 14 13:21:53 2012] rmf not generated due to insufficient counts
[Sat Jul 14 13:42:30 2012] Updating aperture counts using extracted products
[Sat Jul 14 13:42:31 2012] Error reading totcts from fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat Jul 14 13:42:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 13:42:34 2012] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0125120101_pi300-10000_pass1_cl_src59.arf
[Sat Jul 14 13:42:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 13:42:34 2012] Updating source flux to 5e-14
[Sat Jul 14 13:42:38 2012] Source 59 has fewer than 100.000000 counts, skipping spectral fitting