[Mon Jun 11 13:01:40 2012] Detection parameters:
  Position = (230.1, 497.8) = 5 27 28.25 -69 22 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.1 +/- 10.4
  Background counts = 17.8
  Rate = 0.002 +/- 0.0003

[Mon Jun 11 13:01:40 2012] Off-axis axis estimate = 15.28'
[Mon Jun 11 17:55:58 2012] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 17:55:58 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Mon Jun 11 17:55:58 2012] source mask rpix=3.2, npix_max = 55, mask sum = 55, frac = 0.986
[Mon Jun 11 17:55:58 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 14.07"
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jun 12 00:20:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32.csv
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jun 12 00:20:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32.csv
[Tue Jun 12 00:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:26 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jun 12 00:20:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jun 12 00:20:26 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jun 12 00:20:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jun 12 00:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:44 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 17.437990 pixels away
[Tue Jun 12 00:20:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:44 2012] Assessing source extent using major
[Tue Jun 12 00:20:44 2012] Source does appear to be extended
[Tue Jun 12 00:20:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:44 2012] Deleting source due to low Poisson probability 0.8