[Mon Jun 11 13:01:39 2012] Detection parameters:
  Position = (405.0, 263.1) = 5 25 3.14 -69 39 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77165.8 +/- 327.2
  Background counts = 69.4
  Rate = 4 +/- 0.02

[Mon Jun 11 13:01:40 2012] Off-axis axis estimate = 8.14'
[Mon Jun 11 17:55:58 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 17:55:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 17:55:58 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Mon Jun 11 17:55:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Mon Jun 11 17:55:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.50"
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 00:20:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 00:20:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 00:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 00:20:25 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 00:20:25 2012] Fit fullrun_mos2_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 00:20:44 2012] Spatial fit model total counts = 249015.000000, observed total counts = 254207.000000
[Tue Jun 12 00:20:44 2012] Offset between fit and detection position for source 1 = 1.522722 pixels
[Tue Jun 12 00:20:44 2012] 258903.700000 total counts/ 35803.700000 bgd. counts: snr = 1179.059211
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.522722 pixels
  Position = (404.8, 264.6) = 5 25 3.24 -69 38 59.4
  Extent = 21.0 (21.0-42.0)", rotation angle = 0
  Source counts = 223100.0 +/- 508.8
  Background counts = 35803.7
  Rate = 6 +/- 0.01
[Tue Jun 12 00:20:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 00:20:44 2012] Source does appear to be extended
[Tue Jun 12 00:20:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:44 2012] Source is confused with source 2
[Tue Jun 12 01:45:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 01:45:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 01:45:57 2012] Initial guess for spatial extent in simple fitting = 20.99"
[Tue Jun 12 01:45:57 2012] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.969
[Tue Jun 12 01:45:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 20.99"
[Tue Jun 12 09:03:57 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 09:03:57 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 09:03:57 2012] Fit fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jun 12 09:03:57 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 09:03:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 09:03:57 2012] fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 09:03:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 09:03:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:04:01 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Jun 12 09:04:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:04:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:04:01 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:04:01 2012] Source does appear to be extended
[Tue Jun 12 09:04:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:58:48 2012] Counts = 223100.000000, rescaling region sizes by 3.000000
[Tue Jun 12 09:58:49 2012] XMMSAS src. selection expression = ellipse(35173.340000, 22974.346600, 3778.848109, 3778.848109, 0.000000, X, Y)
[Tue Jun 12 09:58:49 2012] Writing source region out to fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 09:58:49 2012] Extracting stamp from image fullrun_mos2_xmm0125100101_pi300-10000_cl_sm2.00.img.gz, (188, 47) - (595, 482)
[Tue Jun 12 09:58:49 2012] XMMSAS bgd. selection expression = annulus(35173.340000, 22974.346600, 18894.240544, 37788.481087, X, Y) && !ellipse(35614.946162, 24082.806595, 5118.840147, 2878.391060, 66.454218, X, Y) && !ellipse(34460.734467, 24359.951630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31530.531968, 26950.572600, 423.620012, 423.620012, 0.000000, X, Y) && !ellipse(39074.231693, 26273.254742, 473.930964, 306.443852, 99.680362, X, Y) && !ellipse(32642.360000, 20634.650000, 1626.280047, 1626.280047, 0.000000, X, Y)
[Tue Jun 12 09:58:49 2012] Writing fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 09:59:11 2012] Mean detx,y = (348.59, -11249.28) 
[Tue Jun 12 09:59:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 10:06:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 10:06:04 2012] Setting source spectrum file to fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 10:06:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 10:41:42 2012] Updating aperture counts using extracted products
[Tue Jun 12 10:41:42 2012] Error reading totcts from fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 10:41:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 10:41:42 2012] Using photon index=1.80, rate=6.42, arf fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 10:41:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 10:41:42 2012] Updating source flux to 9.2e-11
[Tue Jun 12 10:44:48 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 12 10:46:18 2012] Reading fit data from xmm0125100101/analysis//spectral/fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 10:46:18 2012] Spectral fit parameter nH value = 6.92515e+21
[Tue Jun 12 10:46:18 2012] Spectral fit parameter PhoIndex value = 6.77407
[Tue Jun 12 10:46:18 2012] Failed to get F(0.3-8.0) from xmm0125100101/analysis//spectral/fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 10:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 10:46:18 2012] Using Nh = 6.9e+21, photon index=6.77, rate=6.42, arf fullrun_mos2_xmm0125100101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 10:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 10:46:19 2012] Updating source flux to 5.4e-11