[Mon Jun 11 13:01:20 2012] Detection parameters:
  Position = (195.0, 181.2) = 5 27 58.64 -69 45 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.4 +/- 14.4
  Background counts = 22.7
  Rate = 0.003 +/- 0.0004

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 11.33'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Mon Jun 11 13:03:14 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.10"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 11 17:55:58 2012] Fit fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jun 12 00:20:38 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.829775 pixels away
[Tue Jun 12 00:20:39 2012] Spatial fit model total counts = 323.538000, observed total counts = 319.000000
[Tue Jun 12 00:20:39 2012] Offset between fit and detection position for source 9 = 0.546459 pixels
[Tue Jun 12 00:20:39 2012] Warning, changing simple spatial fit ID from 9 to 46
[Tue Jun 12 00:20:39 2012] 324.480400 total counts/ 261.774000 bgd. counts: snr = 3.875686
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.546459 pixels
  Position = (195.5, 181.3) = 5 27 58.20 -69 45 1.8
  Extent = 5.6 (4.3-7.3)", rotation angle = 0
  Source counts = 62.7 +/- 18.0
  Background counts = 261.8
  Rate = 0.002 +/- 0.0005
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:39 2012] Deleting source due to low Poisson probability 0.8