[Mon Jun 11 13:01:21 2012] Detection parameters:
  Position = (218.4, 334.9) = 5 27 38.45 -69 33 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.8 +/- 11.1
  Background counts = 32.2
  Rate = 0.002 +/- 0.0004

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 6.38'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Mon Jun 11 13:03:14 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.749
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.62"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jun 11 17:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:39 2012] Spatial fit model total counts = 417.170000, observed total counts = 367.000000
[Tue Jun 12 00:20:39 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:39 2012] Deleting source due to low Poisson probability 0.8