[Mon Jun 11 13:01:21 2012] Detection parameters:
  Position = (130.1, 429.1) = 5 28 51.05 -69 27 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 12.8
  Background counts = 27.3
  Rate = 0.002 +/- 0.0004

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 15.45'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Mon Jun 11 13:03:14 2012] source mask rpix=3.3, npix_max = 56, mask sum = 63, frac = 1.118
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 14.15"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun 11 17:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:39 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 18.259145 pixels away
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:39 2012] Deleting source due to low Poisson probability 0.9