[Mon Jun 11 13:01:21 2012] Detection parameters:
  Position = (231.8, 265.2) = 5 27 27.51 -69 38 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.6 +/- 13.3
  Background counts = 28.9
  Rate = 0.005 +/- 0.0007

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 5.40'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Mon Jun 11 13:03:14 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.667
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 9.13"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon Jun 11 17:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:38 2012] Source 40 is offset by -5.727109 and -3.533638 pixels which is larger than
2 X fitted extent = 1.802000 x 1.432299, not incorporating fit results
[Tue Jun 12 00:20:39 2012] Warning, spatial fit 40 centroid is now closest to src. 5
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:39 2012] Deleting source due to low Poisson probability 0.9