[Mon Jun 11 13:01:20 2012] Detection parameters:
  Position = (304.3, 328.3) = 5 26 27.13 -69 34 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.9 +/- 19.8
  Background counts = 36.7
  Rate = 0.006 +/- 0.0006

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 2.21'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Mon Jun 11 13:03:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.255
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.53"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Jun 11 17:55:58 2012] Fit fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue Jun 12 00:20:39 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 10.116179 pixels away
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:48 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:20:48 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue Jun 12 00:20:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.255
[Tue Jun 12 00:20:48 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.53"
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jun 12 01:45:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12.csv
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jun 12 01:45:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12.csv
[Tue Jun 12 01:45:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jun 12 01:45:57 2012] Fit fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jun 12 09:04:00 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 169.397058 pixels away
[Tue Jun 12 09:04:00 2012] Spatial fit model total counts = 544.598000, observed total counts = 546.000000
[Tue Jun 12 09:04:00 2012] Offset between fit and detection position for source 37 = 0.180563 pixels
[Tue Jun 12 09:04:00 2012] 542.370000 total counts/ 419.002000 bgd. counts: snr = 6.026907
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.180563 pixels
  Position = (304.1, 328.4) = 5 26 27.24 -69 34 23.3
  Extent = 4.4 (3.7-5.3)", rotation angle = 0
  Source counts = 123.4 +/- 23.3
  Background counts = 419.0
  Rate = 0.004 +/- 0.0007
[Tue Jun 12 09:04:00 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:04:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:04:00 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:04:00 2012] Source does appear to be extended
[Tue Jun 12 09:04:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:04:05 2012] XMMSAS src. selection expression = ellipse(26411.361900, 28524.250000, 261.934208, 261.934208, 0.000000, X, Y)
[Tue Jun 12 09:04:05 2012] Writing source region out to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun 12 09:04:05 2012] Extracting stamp from image fullrun_mos1_xmm0125100101_pi300-10000_cl_sm2.00.img.gz, (289, 313) - (319, 343)
[Tue Jun 12 09:04:05 2012] XMMSAS bgd. selection expression = annulus(26411.361900, 28524.250000, 436.557013, 873.114025, X, Y)
[Tue Jun 12 09:04:05 2012] Writing fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37.gif
[Tue Jun 12 09:17:31 2012] Mean detx,y = (-970.09, 1254.63) 
[Tue Jun 12 09:17:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 09:17:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 09:17:36 2012] Setting source spectrum file to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun 12 09:17:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun 12 10:41:41 2012] Updating aperture counts using extracted products
[Tue Jun 12 10:41:41 2012] Error reading totcts from fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun 12 10:41:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 10:41:42 2012] Using photon index=1.80, rate=0.00355, arf fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src37.arf
[Tue Jun 12 10:41:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 10:41:42 2012] Updating source flux to 4.6e-14