[Mon Jun 11 13:01:20 2012] Detection parameters:
  Position = (184.5, 416.3) = 5 28 6.20 -69 27 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.1 +/- 12.0
  Background counts = 33.3
  Rate = 0.001 +/- 0.0003

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 11.89'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Mon Jun 11 13:03:14 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.095
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.37"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 11 17:55:58 2012] Fit fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jun 12 00:20:38 2012] Spatial fit model total counts = 553.740000, observed total counts = 526.000000
[Tue Jun 12 00:20:38 2012] Offset between fit and detection position for source 17 = 1.629741 pixels
[Tue Jun 12 00:20:38 2012] Warning, changing simple spatial fit ID from 17 to 14
[Tue Jun 12 00:20:38 2012] 549.037000 total counts/ 549.037000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.629741 pixels
  Position = (185.9, 417.1) = 5 28 5.03 -69 27 55.9
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 0.0 +/- 23.4
  Background counts = 549.0
  Rate = 2e-20 +/- 0.0007
  Deleting source due to low Poisson probability