[Mon Jun 11 13:01:20 2012] Detection parameters:
  Position = (363.1, 310.1) = 5 25 38.19 -69 35 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1073.0 +/- 39.6
  Background counts = 39.1
  Rate = 0.04 +/- 0.002

[Mon Jun 11 13:01:21 2012] Off-axis axis estimate = 4.76'
[Mon Jun 11 13:03:14 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:03:14 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Mon Jun 11 13:03:14 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.784
[Mon Jun 11 13:03:14 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.81"
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 17:55:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun 11 17:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 17:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun 11 17:55:58 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun 11 17:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun 11 17:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 00:20:38 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.026890 pixels away
[Tue Jun 12 00:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 00:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 00:20:39 2012] Assessing source extent using major
[Tue Jun 12 00:20:39 2012] Source does appear to be extended
[Tue Jun 12 00:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:20:48 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:20:48 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Tue Jun 12 00:20:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.784
[Tue Jun 12 00:20:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.81"
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 12 01:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7.csv
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 12 01:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7.csv
[Tue Jun 12 01:45:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 12 01:45:57 2012] fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 12 01:45:57 2012] Fit fullrun_mos1_xmm0125100101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jun 12 09:04:00 2012] Spatial fit model total counts = 1277.380000, observed total counts = 1212.000000
[Tue Jun 12 09:04:00 2012] Offset between fit and detection position for source 10 = 0.134571 pixels
[Tue Jun 12 09:04:00 2012] 1272.179000 total counts/ 520.365000 bgd. counts: snr = 32.957660
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.134571 pixels
  Position = (363.0, 310.1) = 5 25 38.30 -69 35 42.5
  Extent = 4.8 (4.5-5.2)", rotation angle = 0
  Source counts = 751.8 +/- 35.7
  Background counts = 520.4
  Rate = 0.02 +/- 0.001
[Tue Jun 12 09:04:00 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:04:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:04:00 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:04:00 2012] Source does appear to be extended
[Tue Jun 12 09:04:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:04:05 2012] XMMSAS src. selection expression = ellipse(31530.218240, 26928.405400, 289.740608, 289.740608, 0.000000, X, Y)
[Tue Jun 12 09:04:05 2012] Writing source region out to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 12 09:04:05 2012] Extracting stamp from image fullrun_mos1_xmm0125100101_pi300-10000_cl_sm2.00.img.gz, (346, 293) - (380, 327)
[Tue Jun 12 09:04:05 2012] XMMSAS bgd. selection expression = annulus(31530.218240, 26928.405400, 482.901014, 965.802028, X, Y) && !ellipse(35135.660600, 23037.180800, 5004.216144, 5004.216144, 0.000000, X, Y) && !ellipse(35271.550000, 23330.026000, 7103.112204, 7103.112204, 0.000000, X, Y) && !ellipse(34308.287994, 23957.850098, 2610.000000, 2610.000000, 0.000000, X, Y)
[Tue Jun 12 09:04:05 2012] Writing fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10.gif
[Tue Jun 12 09:16:09 2012] Mean detx,y = (-6316.16, 1524.61) 
[Tue Jun 12 09:16:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 09:16:18 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 09:16:18 2012] Setting source spectrum file to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 09:16:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 12 10:41:41 2012] Updating aperture counts using extracted products
[Tue Jun 12 10:41:41 2012] Error reading totcts from fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 10:41:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 10:41:42 2012] Using photon index=1.80, rate=0.0217, arf fullrun_mos1_xmm0125100101_pi300-10000_pass1_cl_src10.arf
[Tue Jun 12 10:41:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 10:41:42 2012] Updating source flux to 4.3e-13